1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "AirTight Networks C-75";
10 compatible = "airtight,c-75", "qca,qca9550", "qca,qca9558";
13 label-mac-device = ð0;
14 led-boot = &led_power;
15 led-failsafe = &led_power;
16 led-upgrade = &led_power;
20 compatible = "gpio-keys";
24 linux,code = <KEY_RESTART>;
25 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
30 compatible = "gpio-leds";
33 label = "amber:power";
34 gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
39 label = "green:wlan2g";
40 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
41 linux,default-trigger = "phy1tpt";
46 compatible = "mtd-concat";
47 devices = <&fwconcat0 &fwconcat1>;
50 compatible = "fixed-partitions";
56 reg = <0x0 0x1f90000>;
57 compatible = "denx,uimage";
66 mtd-mac-address = <&art 0x0>;
68 pll-data = <0xa6000000 0x00000101 0x00001616>;
74 phy0: ethernet-phy@0 {
76 qca,ar8327-initvals = <
77 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
78 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
79 0x58 0xc935c935 /* LED2 CTRL */
80 0x5c 0x03ffff00 /* LED3 CTRL */
81 0x7c 0x0000007e /* PORT0_STATUS */
82 0x94 0x0000007e /* PORT6_STATUS */
90 mtd-mac-address = <&art 0x6>;
91 pll-data = <0x03000101 0x00000101 0x00001616>;
103 compatible = "qcom,ath10k";
104 reg = <0x0000 0 0 0 0>;
112 compatible = "jedec,spi-nor";
114 spi-max-frequency = <25000000>;
117 compatible = "fixed-partitions";
118 #address-cells = <1>;
123 reg = <0x000000 0x040000>;
128 label = "u-boot-env";
129 reg = <0x040000 0x010000>;
134 reg = <0x050000 0x010000>;
138 fwconcat0: partition@60000 {
140 reg = <0x060000 0xf90000>;
143 art: partition@ff0000 {
145 reg = <0xff0000 0x010000>;
152 compatible = "jedec,spi-nor";
154 spi-max-frequency = <25000000>;
157 compatible = "fixed-partitions";
158 #address-cells = <1>;
161 fwconcat1: partition@0 {
163 reg = <0x0 0x1000000>;
180 mtd-cal-data = <&art 0x1000>;