target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         compatible = "mikrotik,routerboard-wap-g-5hact2hnd", "qca,qca9556";
  11         model = "MikroTik RouterBOARD wAP G-5HacT2HnD";
  12
  13         aliases {
  14                 label-mac-device = &eth1;
  15                 mdio-gpio1 = &mdio2;
  16                 serial0 = &uart;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys";
  25
  26                 reset {
  27                         label = "reset";
  28                         linux,code = <KEY_RESTART>;
  29                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  30                         debounce-interval = <60>;
  31                 };
  32         };
  33
  34         mdio2: mdio {
  35                 compatible = "virtual,mdio-gpio";
  36
  37                 gpios = <&gpio 12 GPIO_ACTIVE_HIGH>, /* MDC */
  38                         <&gpio 11 GPIO_ACTIVE_HIGH>; /* MDIO */
  39                 #address-cells = <1>;
  40                 #size-cells = <0>;
  41
  42                 phy0: ethernet-phy@0 {
  43                         reg = <0>;
  44                         device_type = "ethernet-phy";
  45
  46                         phy-mode = "sgmii";
  47
  48                         at803x-override-sgmii-link-check;
  49                 };
  50         };
  51 };
  52
  53 &eth1 {
  54         status = "okay";
  55
  56         mtd-mac-address = <&hard_config 0x10>;
  57
  58         pll-data = <0x03000101 0x80000101 0x80001313>;
  59         phy-handle = <&phy0>;
  60
  61         qca955x-sgmii-fixup;
  62
  63         gmac-config {
  64                 device = <&gmac>;
  65         };
  66 };
  67
  68 &spi {
  69         status = "okay";
  70
  71         num-cs = <1>;
  72
  73         flash@0 {
  74                 compatible = "jedec,spi-nor";
  75                 reg = <0>;
  76                 spi-max-frequency = <40000000>;
  77
  78                 partitions {
  79                         compatible = "fixed-partitions";
  80                         #address-cells = <1>;
  81                         #size-cells = <1>;
  82
  83                         partition@0 {
  84                                 label = "RouterBoot";
  85                                 reg = <0x0 0x20000>;
  86                                 read-only;
  87                                 compatible = "fixed-partitions";
  88                                 #address-cells = <1>;
  89                                 #size-cells = <1>;
  90
  91                                 partition@0 {
  92                                         label = "bootloader1";
  93                                         reg = <0x0 0xe000>;
  94                                         read-only;
  95                                 };
  96
  97                                 hard_config: partition@e000 {
  98                                         label = "hard_config";
  99                                         reg = <0xe000 0x1000>;
 100                                         read-only;
 101                                 };
 102
 103                                 partition@f000 {
 104                                         label = "bios";
 105                                         reg = <0xf000 0x1000>;
 106                                         read-only;
 107                                 };
 108
 109                                 partition@10000 {
 110                                         label = "bootloader2";
 111                                         reg = <0x10000 0xf000>;
 112                                         read-only;
 113                                 };
 114
 115                                 partition@1f000 {
 116                                         label = "soft_config";
 117                                         reg = <0x1f000 0x1000>;
 118                                 };
 119                         };
 120
 121                         partition@20000 {
 122                                 compatible = "mikrotik,minor";
 123                                 label = "firmware";
 124                                 reg = <0x020000 0xfe0000>;
 125                         };
 126                 };
 127         };
 128 };
 129
 130 &uart {
 131         status = "okay";
 132 };
 133
 134 &wmac {
 135         status = "okay";
 136
 137         qca,no-eeprom;
 138 };
 139
 140 &pcie0 {
 141         status = "okay";
 142
 143         wifi@0,0 {
 144                 compatible = "qcom,ath10k";
 145                 reg = <0 0 0 0 0>;
 146         };
 147 };