1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/leds/common.h>
10 compatible = "extreme-networks,ws-ap3805i", "qca,qca9557";
11 model = "Extreme Networks WS-AP3805i";
14 led-boot = &led_power_green;
15 led-failsafe = &led_power_amber;
16 led-running = &led_power_green;
17 led-upgrade = &led_power_amber;
18 label-mac-device = ð0;
22 compatible = "gpio-leds";
24 led_power_green: power_green {
25 function = LED_FUNCTION_POWER;
26 color = <LED_COLOR_ID_GREEN>;
27 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
30 led_power_amber: power_amber {
31 function = LED_FUNCTION_POWER;
32 color = <LED_COLOR_ID_AMBER>;
33 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
37 label = "green:wlan5";
38 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
39 linux,default-trigger = "phy0tpt";
43 label = "green:wlan2";
44 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
45 linux,default-trigger = "phy1tpt";
50 compatible = "gpio-keys";
54 linux,code = <KEY_RESTART>;
55 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
60 compatible = "linux,wdt-gpio";
61 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
63 hw_margin_ms = <20000>;
82 compatible = "qcom,ath10k";
84 nvmem-cells = <&cal_art_5000>;
85 nvmem-cell-names = "calibration";
92 phy5: ethernet-phy@5 {
100 phy-handle = <&phy5>;
101 phy-mode = "rgmii-id";
103 pll-data = <0x82000000 0x80000101 0x80001313>;
115 compatible = "jedec,spi-nor";
117 spi-max-frequency = <50000000>;
121 compatible = "fixed-partitions";
122 #address-cells = <1>;
126 label = "u-boot-bak";
133 reg = <0x080000 0x80000>;
139 reg = <0x100000 0x40000>;
145 reg = <0x140000 0x40000>;
151 reg = <0x180000 0x40000>;
157 reg = <0x1c0000 0x40000>;
163 reg = <0x200000 0x40000>;
169 reg = <0x240000 0x40000>;
175 reg = <0x280000 0x1000000>;
181 reg = <0x1280000 0x1000000>;
187 compatible = "denx,uimage";
188 reg = <0x2280000 0x1cc0000>;
193 reg = <0x3f40000 0x80000>;
199 reg = <0x3fc0000 0x40000>;
203 compatible = "fixed-layout";
204 #address-cells = <1>;
207 cal_art_5000: calibration@5000 {
208 reg = <0x5000 0x844>;