1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x_dlink_dap-2xxx.dtsi"
6 compatible = "dlink,dap-2695-a1", "qca,qca9558";
7 model = "D-link DAP-2695-A1";
10 led-boot = &led_power_red;
11 led-failsafe = &led_power_red;
12 led-running = &led_power_green;
13 led-upgrade = &led_power_red;
17 compatible = "gpio-leds";
19 led_power_green: power_green {
20 label = "green:power";
21 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
25 led_power_red: power_red {
27 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
31 label = "green:wifi2g";
32 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
33 linux,default-trigger = "phy1tpt";
38 compatible = "gpio-keys";
42 linux,code = <KEY_RESTART>;
43 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
51 reg = <0x070000 0xf00000>;
57 reg = <0xf70000 0x070000>;
62 label = "certificate";
63 reg = <0xfe0000 0x010000>;
71 phy0: ethernet-phy@0 {
74 qca,ar8327-initvals = <
75 0x04 0x07600000 /* PORT0_PAD_CTRL */
76 0x0c 0x00080080 /* PORT6_PAD_CTRL */
77 0x7c 0x0000007e /* PORT0_STATUS */
78 0x94 0x0000007e /* PORT6_STATUS */
87 pll-data = <0x56000000 0x00000101 0x00001616>;
98 pll-data = <0x03000101 0x00000101 0x00001616>;
110 compatible = "qcom,ath10k";
113 nvmem-cells = <&cal_ath10k>;
114 nvmem-cell-names = "calibration";
120 compatible = "fixed-layout";
121 #address-cells = <1>;
124 cal_ath9k: calibration@1000 {
125 reg = <0x1000 0x440>;
128 cal_ath10k: calibration@5000 {
129 reg = <0x5000 0x844>;