1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca955x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "domywifi,dw33d", "qca,qca9558";
10 model = "DomyWifi DW33D";
13 led-boot = &led_system;
14 led-failsafe = &led_system;
15 led-running = &led_system;
16 led-upgrade = &led_system;
20 compatible = "gpio-leds";
23 label = "blue:system";
24 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
29 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
30 trigger-sources = <&hub_port0>;
31 linux,default-trigger = "usbport";
36 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
37 trigger-sources = <&hub_port1>;
38 linux,default-trigger = "usbport";
42 label = "blue:wlan2g";
43 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
44 linux,default-trigger = "phy1tpt";
48 label = "blue:internet";
49 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
54 compatible = "gpio-keys";
57 label = "Reset button";
58 linux,code = <KEY_RESTART>;
59 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
60 debounce-interval = <60>;
69 compatible = "qcom,ath10k";
85 #trigger-source-cells = <0>;
100 #trigger-source-cells = <0>;
108 compatible = "jedec,spi-nor";
110 spi-max-frequency = <25000000>;
113 compatible = "fixed-partitions";
114 #address-cells = <1>;
124 label = "u-boot-env";
125 reg = <0x40000 0x10000>;
129 label = "oem-firmware";
130 reg = <0x50000 0xfa0000>;
133 art: partition@ff0000 {
135 reg = <0xff0000 0x10000>;
146 compatible = "fixed-partitions";
147 #address-cells = <1>;
152 reg = <0x0 0x500000>;
157 reg = <0x500000 0x5b00000>;
161 label = "oem-backup";
162 reg = <0x6000000 0x2000000>;
170 phy0: ethernet-phy@0 {
173 qca,ar8327-initvals = <
174 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
175 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
176 0x7c 0x0000007e /* PORT0_STATUS */
177 0x94 0x0000007e /* PORT6 STATUS */
185 mtd-mac-address = <&art 0x0>;
186 pll-data = <0x56000000 0x00000101 0x00001616>;
187 phy-handle = <&phy0>;
193 mtd-mac-address = <&art 0x6>;
194 pll-data = <0x03000101 0x00000101 0x00001616>;
204 mtd-cal-data = <&art 0x1000>;
205 mtd-mac-address = <&art 0xc>;