1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca9557.dtsi"
10 compatible = "tplink,tl-wdr4900-v2", "qca,qca9558";
11 model = "TP-Link TL-WDR4900 v2";
14 bootargs = "console=ttyS0,115200n8";
18 led-boot = &led_system;
19 led-failsafe = &led_system;
20 led-running = &led_system;
21 led-upgrade = &led_system;
25 compatible = "gpio-leds";
28 label = "tp-link:blue:system";
29 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
34 label = "tp-link:green:usb1";
35 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
36 trigger-sources = <&hub_port1>;
37 linux,default-trigger = "usbport";
41 label = "tp-link:green:usb2";
42 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
43 trigger-sources = <&hub_port0>;
44 linux,default-trigger = "usbport";
48 label = "tp-link:blue:wlan2g";
49 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
50 linux,default-trigger = "phy0tpt";
54 label = "tp-link:blue:qss";
55 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
60 compatible = "gpio-leds";
63 label = "tp-link:blue:wlan5g";
64 gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
65 linux,default-trigger = "phy1tpt";
70 compatible = "gpio-keys";
73 label = "Reset button";
74 linux,code = <KEY_RESTART>;
75 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
76 debounce-interval = <60>;
81 compatible = "gpio-export";
84 gpio-export,name = "tp-link:power:usb1";
85 gpio-export,output = <1>;
86 gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
90 gpio-export,name = "tp-link:power:usb2";
91 gpio-export,output = <1>;
92 gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
101 compatible = "pci168c,0033";
102 reg = <0x0000 0 0 0 0>;
103 mtd-mac-address = <&uboot 0x1fc00>;
104 mtd-mac-address-increment = <(-2)>;
120 #address-cells = <1>;
126 #trigger-source-cells = <0>;
135 #address-cells = <1>;
141 #trigger-source-cells = <0>;
150 compatible = "jedec,spi-nor";
152 spi-max-frequency = <25000000>;
155 compatible = "fixed-partitions";
156 #address-cells = <1>;
161 reg = <0x000000 0x020000>;
166 compatible = "tplink,firmware";
168 reg = <0x020000 0x7d0000>;
171 art: partition@7f0000 {
173 reg = <0x7f0000 0x010000>;
183 phy0: ethernet-phy@0 {
186 qca,ar8327-initvals = <
187 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
188 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
189 0x50 0xc737c737 /* LED_CTRL0 */
190 0x54 0x00000000 /* LED_CTRL1 */
191 0x58 0x00000000 /* LED_CTRL2 */
192 0x5c 0x0030c300 /* LED_CTRL3 */
193 0x7c 0x0000007e /* PORT0_STATUS */
194 0x94 0x0000007e /* PORT6 STATUS */
202 mtd-mac-address = <&uboot 0x1fc00>;
203 mtd-mac-address-increment = <1>;
204 phy-handle = <&phy0>;
205 pll-data = <0x56000000 0x00000101 0x00001616>;
216 mtd-mac-address = <&uboot 0x1fc00>;
217 pll-data = <0x03000101 0x00000101 0x00001616>;
227 mtd-cal-data = <&art 0x1000>;
228 mtd-mac-address = <&uboot 0x1fc00>;
229 mtd-mac-address-increment = <(-1)>;