target/linux/ath79/dts/qca9561_avm_fritz4020.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "avm,fritz4020", "qca,qca9560";
  11         model = "AVM FRITZ!Box 4020";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_info_red;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_info_red;
  18         };
  19
  20         led_spi {
  21                 compatible = "spi-gpio";
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24
  25                 sck-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  26                 mosi-gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
  27                 num-chipselects = <0>;
  28
  29                 led_gpio: led_gpio@0 {
  30                         compatible = "fairchild,74hc595";
  31                         reg = <0>;
  32                         gpio-controller;
  33                         #gpio-cells = <2>;
  34                         registers-number = <1>;
  35                         spi-max-frequency = <10000000>;
  36
  37                         gpio_latch_bit {
  38                                 gpio-hog;
  39                                 gpios = <7 GPIO_ACTIVE_HIGH>;
  40                                 output-high;
  41                                 line-name = "gpio-latch-bit";
  42                         };
  43                 };
  44         };
  45
  46         leds {
  47                 compatible = "gpio-leds";
  48
  49                 led_power: power {
  50                         label = "fritz4020:green:power";
  51                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
  52                         default-state = "on";
  53                 };
  54
  55                 wlan {
  56                         label = "fritz4020:green:wlan";
  57                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
  58                         linux,default-trigger = "phy0tpt";
  59                 };
  60
  61                 lan {
  62                         label = "fritz4020:green:lan";
  63                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 wan {
  67                         label = "fritz4020:green:wan";
  68                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 info {
  72                         label = "fritz4020:green:info";
  73                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 led_info_red: info_red {
  77                         label = "fritz4020:red:info";
  78                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
  79                 };
  80         };
  81
  82         keys {
  83                 compatible = "gpio-keys";
  84
  85                 wps {
  86                         label = "WPS button";
  87                         linux,code = <KEY_WPS_BUTTON>;
  88                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  89                 };
  90
  91                 wlan {
  92                         label = "WLAN button";
  93                         linux,code = <KEY_RFKILL>;
  94                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  95                 };
  96         };
  97 };
  98
  99 &uart {
 100         status = "okay";
 101 };
 102
 103 &spi {
 104         status = "okay";
 105
 106         num-cs = <1>;
 107
 108         flash@0 {
 109                 compatible = "jedec,spi-nor";
 110                 reg = <0>;
 111                 spi-max-frequency = <25000000>;
 112
 113                 partitions {
 114                         compatible = "fixed-partitions";
 115                         #address-cells = <1>;
 116                         #size-cells = <1>;
 117
 118                         partition@0 {
 119                                 label = "urlader";
 120                                 reg = <0x000000 0x020000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@1 {
 125                                 compatible = "avm,eva-firmware";
 126                                 label = "firmware";
 127                                 reg = <0x020000 0xee0000>;
 128                         };
 129
 130                         partition@2 {
 131                                 label = "tffs (1)";
 132                                 reg = <0xf00000 0x080000>;
 133                                 read-only;
 134                         };
 135
 136                         partition@3 {
 137                                 label = "tffs (2)";
 138                                 reg = <0xf80000 0x080000>;
 139                                 read-only;
 140                         };
 141                 };
 142         };
 143 };
 144
 145 &eth0 {
 146         status = "okay";
 147
 148         phy-handle = <&swphy0>;
 149
 150         gmac-config {
 151                 device = <&gmac>;
 152
 153                 switch-phy-addr-swap = <1>;
 154                 switch-phy-swap = <1>;
 155         };
 156 };
 157
 158 &eth1 {
 159         status = "okay";
 160 };
 161
 162 &wmac {
 163         status = "okay";
 164
 165         qca,no-eeprom;
 166 };