1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca956x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "Compex WPJ563";
10 compatible = "compex,wpj563", "qca,qca9563";
13 label-mac-device = ð0;
15 led-failsafe = &led_sig4;
16 led-running = &led_sig4;
17 led-upgrade = &led_sig4;
21 compatible = "gpio-beeper";
22 gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
26 compatible = "gpio-keys";
30 linux,code = <KEY_RESTART>;
31 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
32 debounce-interval = <60>;
37 compatible = "gpio-leds";
41 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
46 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
51 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
56 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
69 compatible = "jedec,spi-nor";
71 spi-max-frequency = <25000000>;
74 compatible = "fixed-partitions";
80 reg = <0x000000 0x030000>;
85 compatible = "denx,uimage";
87 reg = <0x030000 0xfc0000>;
90 art: partition@ff0000 {
92 reg = <0xff0000 0x010000>;
104 phy0: ethernet-phy@0 {
107 qca,mib-poll-interval = <500>;
109 qca,ar8327-initvals = <
110 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
111 0x7c 0x0000007e /* PORT0_STATUS */
119 pll-data = <0x03000101 0x00000101 0x00001919>;
121 mtd-mac-address = <&uboot 0x2e010>;
123 phy-handle = <&phy0>;
137 mtd-cal-data = <&art 0x1000>;