1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qca956x.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "ROSINSON WR818";
10 compatible = "rosinson,wr818", "qca,qca9563";
13 led-boot = &led_system;
14 led-failsafe = &led_system;
15 led-running = &led_system;
16 led-upgrade = &led_system;
20 compatible = "gpio-leds";
24 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
29 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
30 linux,default-trigger = "phy0tpt";
35 compatible = "gpio-keys";
39 linux,code = <KEY_RESTART>;
40 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
41 debounce-interval = <60>;
56 compatible = "jedec,spi-nor";
58 spi-max-frequency = <25000000>;
61 compatible = "fixed-partitions";
67 reg = <0x000000 0x040000>;
73 reg = <0x040000 0x010000>;
77 info: partition@50000 {
79 reg = <0x050000 0x010000>;
84 compatible = "denx,uimage";
86 reg = <0x060000 0xf80000>;
89 art: partition@ff0000 {
91 reg = <0xff0000 0x010000>;
102 phy0: ethernet-phy@0 {
106 qca,ar8327-initvals = <
107 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
108 0x7c 0x0000007e /* PORT0_STATUS */
116 mtd-mac-address = <&info 0x0>;
118 phy-handle = <&phy0>;
124 mtd-cal-data = <&art 0x1000>;
132 #address-cells = <1>;
138 #trigger-source-cells = <0>;
147 #address-cells = <1>;
153 #trigger-source-cells = <0>;