1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
7 #include "qca956x.dtsi"
11 bootargs = "console=ttyS0,115200n8";
15 compatible = "gpio-keys";
18 linux,code = <KEY_RESTART>;
19 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
20 debounce-interval = <60>;
28 pll-data = <0x03000101 0x00000101 0x00001919>;
30 mtd-mac-address = <&art 0x0>;
44 phy0: ethernet-phy@0 {
48 qca,ar8327-initvals = <
49 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
50 0x10 0x81000080 /* POWER_ON_STRIP */
51 0x50 0xcf37cf37 /* LED_CTRL0 */
52 0x54 0xcf37cf37 /* LED_CTRL1 */
53 0x58 0xcf37cf37 /* LED_CTRL2 */
54 0x5c 0x0000c300 /* LED_CTRL3 */
55 0x7c 0x0000007e /* PORT0_STATUS */
64 compatible = "pci168c,0056";
65 reg = <0x0000 0 0 0 0>;
75 compatible = "jedec,spi-nor";
77 spi-max-frequency = <25000000>;
80 compatible = "fixed-partitions";
86 reg = <0x000000 0x040000>;
92 reg = <0x040000 0x010000>;
96 compatible = "denx,uimage";
98 reg = <0x050000 0xfa0000>;
101 art: partition@ff0000 {
103 reg = <0xff0000 0x010000>;
117 mtd-cal-data = <&art 0x1000>;