3 #include "bcm6318.dtsi"
5 #include <dt-bindings/input/input.h>
8 model = "Comtrend AR-5315u";
9 compatible = "comtrend,ar-5315u", "brcm,bcm6318";
12 led-boot = &led_power_green;
13 led-failsafe = &led_power_green;
14 led-running = &led_power_green;
15 led-upgrade = &led_power_green;
19 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
20 stdout-path = "serial0:115200n8";
24 compatible = "gpio-keys-polled";
31 gpios = <&pinctrl 3 1>;
32 linux,code = <KEY_WPS_BUTTON>;
33 debounce-interval = <60>;
38 gpios = <&pinctrl 33 1>;
39 linux,code = <KEY_RESTART>;
40 debounce-interval = <60>;
49 compatible = "jedec,spi-nor";
50 spi-max-frequency = <62500000>;
51 spi-tx-bus-width = <2>;
52 spi-rx-bus-width = <2>;
59 compatible = "fixed-partitions";
64 reg = <0x000000 0x010000>;
70 reg = <0x010000 0xfe0000>;
72 compatible = "brcm,bcm963xx-imagetag";
76 reg = <0xff0000 0x010000>;
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_leds
88 &pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
89 &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
94 label = "AR-5315u:green:wps";
97 led_power_green: led@1 {
100 label = "AR-5315u:green:power";
101 default-state = "on";
107 label = "AR-5315u:green:usb";
112 brcm,hardware-controlled;
113 brcm,link-signal-sources = <4>;
119 brcm,hardware-controlled;
120 brcm,link-signal-sources = <5>;
126 brcm,hardware-controlled;
127 brcm,link-signal-sources = <6>;
133 brcm,hardware-controlled;
134 brcm,link-signal-sources = <7>;
141 label = "AR-5315u:green:inet";
147 label = "AR-5315u:red:inet";
153 label = "AR-5315u:green:dsl";
159 label = "AR-5315u:red:power";
166 pins = "gpio0", "gpio1",