3 #include "bcm6318.dtsi"
5 #include <dt-bindings/input/input.h>
8 model = "D-Link DSL-2750B/DSL-2751 rev D1";
9 compatible = "d-link,dsl-275xb-d1", "brcm,bcm6318";
12 led-boot = &led_power_green;
13 led-failsafe = &led_power_green;
14 led-running = &led_power_green;
15 led-upgrade = &led_power_green;
19 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
20 stdout-path = "serial0:115200n8";
24 compatible = "gpio-keys-polled";
31 gpios = <&pinctrl 2 1>;
32 linux,code = <KEY_WLAN>;
33 debounce-interval = <60>;
38 gpios = <&pinctrl 33 1>;
39 linux,code = <KEY_WPS_BUTTON>;
40 debounce-interval = <60>;
45 gpios = <&pinctrl 34 1>;
46 linux,code = <KEY_RESTART>;
47 debounce-interval = <60>;
52 compatible = "gpio-leds";
54 led_power_green: power_green {
55 label = "green:power";
56 gpios = <&pinctrl 3 1>;
62 gpios = <&pinctrl 8 1>;
66 label = "red:inet-fail";
67 gpios = <&pinctrl 9 1>;
71 label = "red:post-failed";
72 gpios = <&pinctrl 11 1>;
77 gpios = <&pinctrl 16 1>;
82 gpios = <&pinctrl 17 1>;
86 /* not user controllable? */
88 gpios = <&pinctrl 49 1>;
97 compatible = "jedec,spi-nor";
98 spi-max-frequency = <62500000>;
99 spi-tx-bus-width = <2>;
100 spi-rx-bus-width = <2>;
103 #address-cells = <1>;
107 compatible = "fixed-partitions";
108 #address-cells = <1>;
112 reg = <0x000000 0x010000>;
118 reg = <0x010000 0x7e0000>;
120 compatible = "brcm,bcm963xx-imagetag";
124 reg = <0x7f0000 0x010000>;
132 pinctrl-names = "default";
134 pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
135 &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;