3 #include "bcm6318.dtsi"
5 #include <dt-bindings/input/input.h>
8 model = "Sagem F@st 2704N";
9 compatible = "sagem,fast-2704n", "brcm,bcm6318";
12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
13 stdout-path = "serial0:115200n8";
17 compatible = "gpio-keys-polled";
24 gpios = <&pinctrl 1 0>;
25 linux,code = <KEY_WLAN>;
26 debounce-interval = <60>;
31 gpios = <&pinctrl 33 1>;
32 linux,code = <KEY_WPS_BUTTON>;
33 debounce-interval = <60>;
38 gpios = <&pinctrl 34 1>;
39 linux,code = <KEY_RESTART>;
40 debounce-interval = <60>;
45 compatible = "gpio-leds";
48 label = "F@ST2704N:green:wps";
49 gpios = <&pinctrl 2 1>;
52 label = "F@ST2704N:green:lan1";
53 gpios = <&pinctrl 4 1>;
56 label = "F@ST2704N:green:lan2";
57 gpios = <&pinctrl 5 1>;
60 label = "F@ST2704N:green:lan3";
61 gpios = <&pinctrl 6 1>;
64 label = "F@ST2704N:green:lan4";
65 gpios = <&pinctrl 7 1>;
68 label = "F@ST2704N:green:inet";
69 gpios = <&pinctrl 8 1>;
72 label = "F@ST2704N:red:inet";
73 gpios = <&pinctrl 9 1>;
76 label = "F@ST2704N:green:dsl";
77 gpios = <&pinctrl 10 1>;
80 label = "F@ST2704N:red:power";
81 gpios = <&pinctrl 11 1>;
84 label = "F@ST2704N:green:power";
85 gpios = <&pinctrl 47 1>;
89 label = "F@ST2704N:green:usb";
90 gpios = <&pinctrl 49 1>;
99 compatible = "jedec,spi-nor";
100 spi-max-frequency = <62500000>;
101 spi-tx-bus-width = <2>;
102 spi-rx-bus-width = <2>;
105 #address-cells = <1>;
109 compatible = "fixed-partitions";
110 #address-cells = <1>;
114 reg = <0x000000 0x010000>;
120 reg = <0x010000 0x7e0000>;
122 compatible = "brcm,bcm963xx-imagetag";
126 reg = <0x7f0000 0x010000>;