brcm2708: use BuildDTB in image/Makefile
[openwrt/openwrt.git] / target / linux / brcm2708 / patches-3.18 / 1000-BCM2708-fix-SPIDEV.patch
1 --- a/arch/arm/mach-bcm2708/bcm2708.c
2 +++ b/arch/arm/mach-bcm2708/bcm2708.c
3 @@ -559,7 +559,6 @@ static struct platform_device bcm2708_sp
4
5 #ifdef CONFIG_BCM2708_SPIDEV
6 static struct spi_board_info bcm2708_spi_devices[] = {
7 -#ifdef CONFIG_SPI_SPIDEV
8 {
9 .modalias = "spidev",
10 .max_speed_hz = 500000,
11 @@ -573,7 +572,6 @@ static struct spi_board_info bcm2708_spi
12 .chip_select = 1,
13 .mode = SPI_MODE_0,
14 }
15 -#endif
16 };
17 #endif
18
19 --- a/arch/arm/mach-bcm2709/bcm2709.c
20 +++ b/arch/arm/mach-bcm2709/bcm2709.c
21 @@ -581,7 +581,6 @@ static struct platform_device bcm2708_sp
22
23 #ifdef CONFIG_BCM2708_SPIDEV
24 static struct spi_board_info bcm2708_spi_devices[] = {
25 -#ifdef CONFIG_SPI_SPIDEV
26 {
27 .modalias = "spidev",
28 .max_speed_hz = 500000,
29 @@ -595,7 +594,6 @@ static struct spi_board_info bcm2708_spi
30 .chip_select = 1,
31 .mode = SPI_MODE_0,
32 }
33 -#endif
34 };
35 #endif
36