4 compatible = "brcm,bcm6328";
18 compatible = "brcm,bmips4350", "mips,mips4Kc";
24 cpu_intc: interrupt-controller {
26 compatible = "mti,cpu-interrupt-controller";
29 #interrupt-cells = <1>;
32 memory { device_type = "memory"; reg = <0 0>; };
38 compatible = "simple-bus";
39 interrupt-parent = <&periph_intc>;
41 ext_intc: interrupt-controller@10000018 {
42 compatible = "brcm,bcm6345-ext-intc";
43 reg = <0x10000018 0x4>;
46 #interrupt-cells = <2>;
48 interrupts = <24>, <25>, <26>, <27>;
51 periph_intc: interrupt-controller@10000020 {
52 compatible = "brcm,bcm6345-l1-intc";
53 reg = <0x10000020 0x10>;
56 #interrupt-cells = <1>;
58 interrupt-parent = <&cpu_intc>;
62 pinctrl: pin-controller@10000080 {
63 compatible = "brcm,bcm6328-pinctrl";
64 reg = <0x10000080 0x8>,
68 reg-names = "dirout", "dat", "mode", "mux";
73 interrupt-parent = <&ext_intc>;
74 interrupts = <3 0>, <2 0>, <0 0>, <1 0>;
75 interrupt-names = "gpio12", "gpio15",
78 pinctrl_serial_led: serial_led {
79 pinctrl_serial_led_data: serial_led_data {
80 function = "serial_led_data";
84 pinctrl_serial_led_clk: serial_led_clk {
85 function = "serial_led_clk";
90 pinctrl_inet_act_led: inet_act_led {
91 function = "inet_act_led";
95 pinctrl_pcie_clkreq: pcie_clkreq {
96 function = "pcie_clkreq";
100 pinctrl_ephy0_spd_led: ephy0_spd_led {
105 pinctrl_ephy1_spd_led: ephy1_spd_led {
110 pinctrl_ephy2_spd_led: ephy2_spd_led {
115 pinctrl_ephy3_spd_led: ephy3_spd_led {
120 pinctrl_ephy0_act_led: ephy0_act_led {
121 function = "ephy0_act_led";
125 pinctrl_ephy1_act_led: ephy1_act_led {
126 function = "ephy1_act_led";
130 pinctrl_ephy2_act_led: ephy2_act_led {
131 function = "ephy2_act_led";
135 pinctrl_ephy3_act_led: ephy3_act_led {
136 function = "ephy3_act_led";
140 pinctrl_hsspi_cs1: hsspi_cs1 {
141 function = "hsspi_cs1";
145 pinctrl_usb_port1_device: usb_port1_device {
146 function = "usb_device_port";
150 pinctrl_usb_port1_host: usb_port1_host {
151 function = "usb_host_port";
156 uart0: serial@10000100 {
157 compatible = "brcm,bcm6345-uart";
158 reg = <0x10000100 0x18>;
160 interrupt-parent = <&periph_intc>;
163 /* clocks = <&periph_clk>; */
164 /* clock-names = "refclk"; */
169 uart1: serial@10000120 {
170 compatible = "brcm,bcm6345-uart";
171 reg = <0x10000120 0x18>;
173 interrupt-parent = <&periph_intc>;
176 /* clocks = <&periph_clk>; */
177 /* clock-names = "refclk"; */
182 leds: led-controller@10000800 {
183 #address-cells = <1>;
185 compatible = "brcm,bcm6328-leds";
186 reg = <0x10000800 0x24>;
190 hsspi: spi@10001000 {
191 #address-cells = <1>;
193 compatible = "brcm,bcm6328-hsspi";
194 reg = <0x10001000 0x600>;
196 /* clocks = <&clkctl 9>; */