1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
3 * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
19 #include "qcom-ipq4019.dtsi"
20 #include <dt-bindings/gpio/gpio.h>
21 #include <dt-bindings/input/input.h>
22 #include <dt-bindings/soc/qcom,tcsr.h>
25 model = "Compex WPJ428";
26 compatible = "compex,wpj428";
30 * There's a chance that SPI reads fail even though the data itself is alright.
31 * The read result is cached and squashfs can't recover.
32 * Just panic when that happens and hope that next time it doesn't.
34 bootargs-append = " rootflags=errors=panic";
44 pinctrl-0 = <&mdio_pins>;
45 pinctrl-names = "default";
46 reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
47 reset-delay-us = <2000>;
52 compatible = "qcom,tcsr";
53 reg = <0x194b000 0x100>;
54 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
59 compatible = "qcom,tcsr";
60 reg = <0x1949000 0x100>;
61 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
65 compatible = "qcom,tcsr";
66 reg = <0x1953000 0x1000>;
67 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
71 compatible = "qcom,tcsr";
72 reg = <0x1957000 0x100>;
73 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
94 compatible = "gpio-keys";
98 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
99 linux,code = <KEY_RESTART>;
105 led-failsafe = &status;
106 led-upgrade = &status;
110 compatible = "gpio-leds";
113 label = "green:rss4";
114 gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
118 label = "green:rss3";
119 gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
124 compatible = "gpio-beeper";
125 gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
130 mdio_pins: mdio_pinmux {
144 serial_pins: serial_pinmux {
146 pins = "gpio60", "gpio61";
147 function = "blsp_uart0";
152 spi_0_pins: spi_0_pinmux {
154 function = "blsp_spi0";
155 pins = "gpio55", "gpio56", "gpio57";
156 drive-strength = <12>;
162 drive-strength = <2>;
174 pinctrl-0 = <&spi_0_pins>;
175 pinctrl-names = "default";
177 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
180 compatible = "jedec,spi-nor";
182 spi-max-frequency = <24000000>;
185 compatible = "fixed-partitions";
186 #address-cells = <1>;
191 reg = <0x00000000 0x00040000>;
196 reg = <0x00040000 0x00020000>;
201 reg = <0x00060000 0x00060000>;
206 reg = <0x000c0000 0x00010000>;
210 label = "0:DDRPARAMS";
211 reg = <0x000d0000 0x00010000>;
215 label = "0:APPSBLENV"; /* uboot env*/
216 reg = <0x000e0000 0x00010000>;
220 label = "0:APPSBL"; /* uboot */
221 reg = <0x000f0000 0x00080000>;
226 reg = <0x00170000 0x00010000>;
230 compatible = "fixed-layout";
231 #address-cells = <1>;
234 macaddr_art_e010: mac-address@e010 {
238 macaddr_art_e018: mac-address@e018 {
242 precal_art_1000: precal@1000 {
243 reg = <0x1000 0x2f20>;
246 precal_art_5000: precal@5000 {
247 reg = <0x5000 0x2f20>;
252 compatible = "denx,fit";
254 reg = <0x00180000 0x01e80000>;
261 pinctrl-0 = <&serial_pins>;
262 pinctrl-names = "default";
282 nvmem-cells = <&macaddr_art_e018>;
283 nvmem-cell-names = "mac-address";
290 nvmem-cells = <&macaddr_art_e010>;
291 nvmem-cell-names = "mac-address";
308 nvmem-cell-names = "pre-calibration";
309 nvmem-cells = <&precal_art_1000>;
314 nvmem-cell-names = "pre-calibration";
315 nvmem-cells = <&precal_art_5000>;