1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
9 model = "Linksys EA6350v3";
10 compatible = "linksys,ea6350v3", "qcom,ipq4019";
14 led-failsafe = &power;
29 compatible = "qcom,tcsr";
30 reg = <0x1949000 0x100>;
31 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
35 compatible = "qcom,tcsr";
36 reg = <0x194b000 0x100>;
37 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
41 compatible = "qcom,tcsr";
42 reg = <0x1953000 0x1000>;
43 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
47 compatible = "qcom,tcsr";
48 reg = <0x1957000 0x100>;
49 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
78 compatible = "gpio-keys";
82 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
83 linux,code = <KEY_RESTART>;
88 gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
89 linux,code = <KEY_WPS_BUTTON>;
94 compatible = "gpio-leds";
97 label = "EA6350v3:green:status";
98 gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
104 pinctrl-0 = <&serial_pins>;
105 pinctrl-names = "default";
115 qcom,ath10k-calibration-variant = "linksys-ea6350v3";
120 qcom,ath10k-calibration-variant = "linksys-ea6350v3";
129 serial_pins: serial_pinmux {
131 pins = "gpio60", "gpio61";
132 function = "blsp_uart0";
137 spi_0_pins: spi_0_pinmux {
139 function = "blsp_spi0";
140 pins = "gpio55", "gpio56", "gpio57";
141 drive-strength = <12>;
147 pins = "gpio54", "gpio59";
148 drive-strength = <2>;
155 &blsp1_spi1 { /* BLSP1 QUP1 */
156 pinctrl-0 = <&spi_0_pins>;
157 pinctrl-names = "default";
159 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
160 <&tlmm 59 GPIO_ACTIVE_HIGH>;
163 compatible = "jedec,spi-nor";
165 spi-max-frequency = <24000000>;
168 compatible = "fixed-partitions";
169 #address-cells = <1>;
174 reg = <0x00000000 0x00040000>;
179 reg = <0x00040000 0x00020000>;
184 reg = <0x00060000 0x00060000>;
189 reg = <0x000c0000 0x00010000>;
194 reg = <0x000d0000 0x00010000>;
198 label = "APPSBL"; /* uboot */
199 reg = <0x000e0000 0x00080000>;
204 reg = <0x00160000 0x00010000>;
209 reg = <0x00170000 0x00020000>;
213 reg = <0x00190000 0x00020000>;
217 reg = <0x001b0000 0x00010000>;
219 /* 0x001c0000 - 0x00200000 unused */
225 compatible = "spinand,mt29f", "w25n01gv";
227 spi-max-frequency = <24000000>;
230 compatible = "fixed-partitions";
231 #address-cells = <1>;
236 reg = <0x00000000 0x02800000>;
240 reg = <0x00300000 0x02500000>;
243 label = "alt_kernel";
244 reg = <0x02800000 0x02800000>;
247 label = "alt_rootfs";
248 reg = <0x02b00000 0x02500000>;
252 reg = <0x05000000 0x00100000>;
256 reg = <0x05100000 0x02F00000>;
258 /* 0x00000000 - 0x08000000: 128 MiB */