1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18 #include "qcom-ipq4019.dtsi"
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/input/input.h>
21 #include <dt-bindings/soc/qcom,tcsr.h>
24 model = "Netgear EX61X0v2";
25 compatible = "netgear,ex61x0v2", "qcom,ipq4019";
37 compatible = "qcom,tcsr";
38 reg = <0x1949000 0x100>;
39 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
43 compatible = "qcom,tcsr";
44 reg = <0x1953000 0x1000>;
45 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
49 compatible = "qcom,tcsr";
50 reg = <0x1957000 0x100>;
51 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
55 pinctrl-0 = <&serial_pins>;
56 pinctrl-names = "default";
79 led-boot = &power_amber;
80 led-failsafe = &power_amber;
81 led-running = &power_green;
82 led-upgrade = &power_amber;
86 compatible = "gpio-keys";
90 gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
91 linux,code = <KEY_WPS_BUTTON>;
96 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
97 linux,code = <KEY_RESTART>;
102 compatible = "spi-gpio";
103 #address-cells = <1>;
106 gpio-sck = <&tlmm 5 GPIO_ACTIVE_HIGH>;
107 gpio-mosi = <&tlmm 4 GPIO_ACTIVE_HIGH>;
108 num-chipselects = <0>;
110 led_gpio: led_gpio@0 {
111 compatible = "fairchild,74hc595";
115 registers-number = <1>;
116 spi-max-frequency = <1000000>;
121 compatible = "gpio-leds";
123 power_amber: power_amber {
124 label = "ex61x0v2:amber:power";
125 gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
128 power_green: power_green {
129 label = "ex61x0v2:green:power";
130 gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
134 label = "ex61x0v2:blue:right";
135 gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
139 label = "ex61x0v2:blue:left";
140 gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
144 label = "ex61x0v2:green:client";
145 gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
149 label = "ex61x0v2:red:client";
150 gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
154 label = "ex61x0v2:green:router";
155 gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
159 label = "ex61x0v2:red:router";
160 gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
164 label = "ex61x0v2:green:wps";
165 gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
171 serial_pins: serial_pinmux {
173 pins = "gpio60", "gpio61";
174 function = "blsp_uart0";
179 spi_0_pins: spi_0_pinmux {
181 function = "blsp_spi0";
182 pins = "gpio55", "gpio56", "gpio57";
183 drive-strength = <12>;
189 drive-strength = <2>;
197 pinctrl-0 = <&spi_0_pins>;
198 pinctrl-names = "default";
200 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
203 compatible = "jedec,spi-nor";
205 spi-max-frequency = <24000000>;
208 compatible = "fixed-partitions";
209 #address-cells = <1>;
214 reg = <0x00000000 0x00040000>;
220 reg = <0x00040000 0x00020000>;
226 reg = <0x00060000 0x00060000>;
232 reg = <0x000c0000 0x00010000>;
238 reg = <0x000d0000 0x00010000>;
244 reg = <0x000e0000 0x00010000>;
250 reg = <0x000f0000 0x00080000>;
256 reg = <0x00170000 0x00010000>;
262 reg = <0x00180000 0x00010000>;
268 reg = <0x00190000 0x00010000>;
274 reg = <0x001a0000 0x00010000>;
280 reg = <0x001b0000 0x00e10000>;
285 reg = <0x00fc0000 0x00040000>;