1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
9 model = "AVM FRITZ!Repeater 1200";
10 compatible = "avm,fritzrepeater-1200";
13 led-boot = &power_green;
14 led-failsafe = &power_red;
15 led-running = &power_green;
16 led-upgrade = &power_red;
22 pinctrl-0 = <&mdio_pins>;
23 pinctrl-names = "default";
27 compatible = "qcom,tcsr";
28 reg = <0x1949000 0x100>;
29 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
33 compatible = "qcom,tcsr";
34 reg = <0x1953000 0x1000>;
35 qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
39 compatible = "qcom,tcsr";
40 reg = <0x1957000 0x100>;
41 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
53 switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
54 switch_lan_bmp = <0x0>; /* lan port bitmap */
55 switch_wan_bmp = <0x10>; /* wan port bitmap */
60 phy-mode = "rgmii-rxid";
67 compatible = "gpio-keys";
71 gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
72 linux,code = <KEY_WPS_BUTTON>;
77 compatible = "gpio-leds";
79 power_red: power_red {
80 label = "fritzwlan-1200:red:power";
81 gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
84 power_green: power_green {
85 label = "fritzwlan-1200:green:power";
86 gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
90 label = "fritzwlan-1200:yellow:power";
91 gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
97 serial_0_pins: serial_pinmux {
99 pins = "gpio16", "gpio17";
100 function = "blsp_uart0";
105 nand_pins: nand_pins {
107 pins = "gpio53", "gpio58", "gpio59";
113 pins = "gpio54", "gpio55", "gpio56",
114 "gpio57", "gpio60", "gpio61",
115 "gpio62", "gpio63", "gpio64",
116 "gpio65", "gpio66", "gpio67",
123 mdio_pins: mdio_pinmux {
137 line-name = "PHY-reset";
138 gpios = <19 GPIO_ACTIVE_HIGH>;
144 line-name = "PHY-reset-2";
145 gpios = <47 GPIO_ACTIVE_HIGH>;
152 pinctrl-0 = <&nand_pins>;
153 pinctrl-names = "default";
158 compatible = "fixed-partitions";
159 #address-cells = <1>;
170 reg = <0x80000 0x80000>;
176 reg = <0x100000 0x80000>;
182 reg = <0x180000 0x40000>;
188 reg = <0x1c0000 0x80000>;
194 reg = <0x240000 0x40000>;
200 reg = <0x280000 0x40000>;
206 reg = <0x2c0000 0x840000>;
211 /* 'kernel1' in AVM firmware */
213 reg = <0xb00000 0x400000>;
217 /* 'kernel2' in AVM firmware */
219 reg = <0xf00000 0x400000>;
224 reg = <0x1300000 0x6d00000>;
239 pinctrl-0 = <&serial_0_pins>;
240 pinctrl-names = "default";
250 qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
255 qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
259 qcom,phy_mdio_addr = <0>;
260 qcom,poll_required = <1>;