1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 * Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18 #include "qcom-ipq4019.dtsi"
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/input/input.h>
21 #include <dt-bindings/soc/qcom,tcsr.h>
24 model = "8devices Jalapeno";
25 compatible = "8dev,jalapeno";
34 pinctrl-0 = <&mdio_pins>;
35 pinctrl-names = "default";
43 compatible = "qcom,qca-gcnt";
48 compatible = "qcom,tcsr";
49 reg = <0x1949000 0x100>;
50 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
55 compatible = "qcom,tcsr";
56 reg = <0x194b000 0x100>;
57 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
62 compatible = "qcom,tcsr";
63 reg = <0x1953000 0x1000>;
64 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
68 compatible = "qcom,tcsr";
69 reg = <0x1957000 0x100>;
70 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
91 switch_lan_bmp = <0x10>; /* lan port bitmap */
101 mdio_pins: mdio_pinmux {
111 pins = "gpio52", "gpio53";
116 serial_pins: serial_pinmux {
118 pins = "gpio60", "gpio61";
119 function = "blsp_uart0";
124 spi_0_pins: spi_0_pinmux {
126 function = "blsp_spi0";
127 pins = "gpio55", "gpio56", "gpio57";
128 drive-strength = <2>;
133 pins = "gpio54", "gpio59";
134 drive-strength = <2>;
146 pinctrl-0 = <&spi_0_pins>;
147 pinctrl-names = "default";
148 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
153 compatible = "jedec,spi-nor";
154 spi-max-frequency = <24000000>;
157 compatible = "fixed-partitions";
158 #address-cells = <1>;
163 reg = <0x00000000 0x00040000>;
168 reg = <0x00040000 0x00020000>;
173 reg = <0x00060000 0x00060000>;
178 reg = <0x000c0000 0x00010000>;
183 reg = <0x000d0000 0x00010000>;
187 label = "APPSBLENV"; /* uboot env*/
188 reg = <0x000e0000 0x00010000>;
192 label = "APPSBL"; /* uboot */
193 reg = <0x000f0000 0x00080000>;
198 reg = <0x00170000 0x00010000>;
206 compatible = "spi-nand";
208 spi-max-frequency = <24000000>;
210 compatible = "fixed-partitions";
211 #address-cells = <1>;
216 reg = <0x00000000 0x08000000>;
223 pinctrl-0 = <&serial_pins>;
224 pinctrl-names = "default";
233 qcom,poll_required = <1>;
234 qcom,poll_required_dynamic = <1>;
235 qcom,phy_mdio_addr = <3>;
240 qcom,poll_required = <1>;
241 qcom,poll_required_dynamic = <1>;
242 qcom,phy_mdio_addr = <4>;
248 qcom,ath10k-calibration-variant = "8devices-Jalapeno";
253 qcom,ath10k-calibration-variant = "8devices-Jalapeno";