1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
10 device_type = "memory";
11 reg = <0x80000000 0x10000000>;
21 pinctrl-0 = <&mdio_pins>;
22 pinctrl-names = "default";
24 ethphy: ethernet-phy@5 {
30 compatible = "qcom,qca-gcnt";
35 compatible = "qcom,tcsr";
36 reg = <0x1953000 0x1000>;
37 qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
41 compatible = "qcom,tcsr";
42 reg = <0x1949000 0x100>;
43 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
47 compatible = "qcom,tcsr";
48 reg = <0x1957000 0x100>;
49 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
61 pinctrl-0 = <&i2c_0_pins>;
62 pinctrl-names = "default";
67 compatible = "atmel,at97sc3203";
75 compatible = "gpio-keys";
78 label = "Reset button";
79 gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
80 linux,code = <KEY_RESTART>;
90 /* Texas Instruments CC2540T BLE radio */
91 pinctrl-0 = <&serial_0_pins>;
92 pinctrl-names = "default";
97 pinctrl-0 = <&serial_1_pins>;
98 pinctrl-names = "default";
111 mdio_pins: mdio_pinmux {
124 nand_pins: nand_pins {
126 pins = "gpio53", "gpio58", "gpio59";
132 pins = "gpio54", "gpio55", "gpio56",
133 "gpio57", "gpio60", "gpio61",
134 "gpio62", "gpio63", "gpio64",
135 "gpio65", "gpio66", "gpio67",
142 spi_0_pins: spi_0_pinmux {
144 function = "blsp_spi0";
145 pins = "gpio13", "gpio14", "gpio15";
146 drive-strength = <12>;
152 drive-strength = <2>;
158 i2c_0_pins: i2c_0_pinmux {
160 pins = "gpio10", "gpio11";
161 function = "blsp_i2c0";
162 drive-strength = <4>;
167 serial_0_pins: serial_0_pinmux {
169 pins = "gpio16", "gpio17";
170 function = "blsp_uart0";
175 serial_1_pins: serial_1_pinmux {
177 pins = "gpio8", "gpio9";
178 function = "blsp_uart1";
185 pinctrl-0 = <&nand_pins>;
186 pinctrl-names = "default";
191 compatible = "fixed-partitions";
192 #address-cells = <1>;
196 /* 'aos0' in Aruba firmware */
198 reg = <0x0 0x2000000>;
203 /* 'aos1' in Aruba firmware */
205 reg = <0x2000000 0x2000000>;
209 label = "aruba-ubifs";
210 reg = <0x4000000 0x4000000>;
224 /delete-property/ psgmii-ethphy;
231 phy-handle = <ðphy>;
232 phy-mode = "rgmii-id";
261 nvmem-cell-names = "pre-calibration", "mac-address";
262 nvmem-cells = <&precal_art_1000>, <&macaddr_mfginfo_1d 0>;
263 qcom,ath10k-calibration-variant = "Aruba-AP-303";
268 nvmem-cell-names = "pre-calibration", "mac-address";
269 nvmem-cells = <&precal_art_5000>, <&macaddr_mfginfo_1d 1>;
270 qcom,ath10k-calibration-variant = "Aruba-AP-303";