target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  *
  16  */
  17
  18 #include "qcom-ipq4019.dtsi"
  19 #include <dt-bindings/gpio/gpio.h>
  20 #include <dt-bindings/input/input.h>
  21 #include <dt-bindings/leds/common.h>
  22 #include <dt-bindings/soc/qcom,tcsr.h>
  23
  24 / {
  25         model = "ZyXEL WRE6606";
  26         compatible = "zyxel,wre6606";
  27
  28         aliases {
  29                 led-boot = &power;
  30                 led-failsafe = &power;
  31                 led-running = &power;
  32                 led-upgrade = &power;
  33         };
  34
  35         chosen {
  36                 bootargs-append = " mtdparts=";
  37         };
  38
  39         soc {
  40                 mdio@90000 {
  41                         status = "okay";
  42                 };
  43
  44                 tcsr@1949000 {
  45                         compatible = "qcom,tcsr";
  46                         reg = <0x1949000 0x100>;
  47                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  48                 };
  49
  50                 ess_tcsr@1953000 {
  51                         compatible = "qcom,tcsr";
  52                         reg = <0x1953000 0x1000>;
  53                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  54                 };
  55
  56                 tcsr@1957000 {
  57                         compatible = "qcom,tcsr";
  58                         reg = <0x1957000 0x100>;
  59                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  60                 };
  61
  62                 crypto@8e3a000 {
  63                         status = "okay";
  64                 };
  65         };
  66
  67         leds {
  68                 compatible = "gpio-leds";
  69
  70                 wps {
  71                         function = LED_FUNCTION_WPS;
  72                         color = <LED_COLOR_ID_GREEN>;
  73                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
  74                 };
  75
  76                 wlan5g_green {
  77                         label = "green:wlan5g";
  78                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
  79                 };
  80
  81                 power: power {
  82                         function = LED_FUNCTION_POWER;
  83                         color = <LED_COLOR_ID_GREEN>;
  84                         gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
  85                 };
  86
  87                 wlan5g_red {
  88                         label = "red:wlan5g";
  89                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
  90                 };
  91
  92                 wlan2g_red {
  93                         label = "red:wlan2g";
  94                         gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
  95                 };
  96
  97                 wlan2g_green {
  98                         label = "green:wlan2g";
  99                         gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
 100                 };
 101         };
 102
 103         keys {
 104                 compatible = "gpio-keys";
 105
 106                 wps {
 107                         label = "wps";
 108                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 109                         linux,code = <KEY_WPS_BUTTON>;
 110                 };
 111         };
 112 };
 113
 114 &watchdog {
 115         status = "okay";
 116 };
 117
 118 &prng {
 119         status = "okay";
 120 };
 121
 122 &tlmm {
 123         serial_pins: serial_pinmux {
 124                 mux {
 125                         pins = "gpio60", "gpio61";
 126                         function = "blsp_uart0";
 127                         bias-disable;
 128                 };
 129         };
 130
 131         spi_0_pins: spi_0_pinmux {
 132                 pin {
 133                         function = "blsp_spi0";
 134                         pins = "gpio55", "gpio56", "gpio57";
 135                         drive-strength = <12>;
 136                         bias-disable;
 137                 };
 138                 pin_cs {
 139                         function = "gpio";
 140                         pins = "gpio54";
 141                         drive-strength = <2>;
 142                         bias-disable;
 143                         output-high;
 144                 };
 145         };
 146 };
 147
 148 &blsp_dma {
 149         status = "okay";
 150 };
 151
 152 &blsp1_spi1 {
 153         pinctrl-0 = <&spi_0_pins>;
 154         pinctrl-names = "default";
 155         status = "okay";
 156         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 157
 158         mx25l12805d@0 {
 159                 compatible = "jedec,spi-nor";
 160                 reg = <0>;
 161                 spi-max-frequency = <24000000>;
 162
 163                 partitions {
 164                         compatible = "fixed-partitions";
 165                         #address-cells = <1>;
 166                         #size-cells = <1>;
 167
 168                         partition0@0 {
 169                                 label = "SBL1";
 170                                 reg = <0x00000000 0x00040000>;
 171                                 read-only;
 172                         };
 173
 174                         partition1@40000 {
 175                                 label = "MIBIB";
 176                                 reg = <0x00040000 0x00020000>;
 177                                 read-only;
 178                         };
 179
 180                         partition2@60000 {
 181                                 label = "QSEE";
 182                                 reg = <0x00060000 0x00060000>;
 183                                 read-only;
 184                         };
 185
 186                         partition3@c0000 {
 187                                 label = "CDT";
 188                                 reg = <0x000c0000 0x00010000>;
 189                                 read-only;
 190                         };
 191
 192                         partition4@d0000 {
 193                                 label = "DDRPARAMS";
 194                                 reg = <0x000d0000 0x00010000>;
 195                                 read-only;
 196                         };
 197
 198                         partition5@E0000 {
 199                                 label = "APPSBLENV";
 200                                 reg = <0x000e0000 0x00010000>;
 201                                 read-only;
 202                         };
 203
 204                         partition6@F0000 {
 205                                 label = "APPSBL";
 206                                 reg = <0x000f0000 0x00080000>;
 207                                 read-only;
 208                         };
 209
 210                         partition7@170000 {
 211                                 label = "ART";
 212                                 reg = <0x00170000 0x00010000>;
 213                                 read-only;
 214                         };
 215
 216                         partition8@180000 {
 217                                 compatible = "denx,fit";
 218                                 label = "firmware";
 219                                 reg = <0x00180000 0x00ce0000>;
 220                         };
 221
 222                         partition9@e60000 {
 223                                 label = "manufacture";
 224                                 reg = <0x00e60000 0x00050000>;
 225                                 read-only;
 226                         };
 227
 228                         partition10@eb0000 {
 229                                 label = "storage";
 230                                 reg = <0x00eb0000 0x00150000>;
 231                                 read-only;
 232                         };
 233                 };
 234         };
 235 };
 236
 237 &blsp1_uart1 {
 238         pinctrl-0 = <&serial_pins>;
 239         pinctrl-names = "default";
 240         status = "okay";
 241 };
 242
 243 &cryptobam {
 244         status = "okay";
 245 };
 246
 247 &wifi0 {
 248         status = "okay";
 249         qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
 250 };
 251
 252 &wifi1 {
 253         status = "okay";
 254         qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
 255 };