target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-mf18a.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 // Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
   3 // Copyright (c) 2022, Marcin Gajda <mgajda@o2.pl>.
   4
   5
   6 #include "qcom-ipq4019.dtsi"
   7 #include <dt-bindings/soc/qcom,tcsr.h>
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/input/input.h>
  10 #include <dt-bindings/leds/common.h>
  11
  12 / {
  13         model = "ZTE MF18A";
  14         compatible = "zte,mf18a";
  15
  16         aliases {
  17                 led-boot = &led_power;
  18                 led-failsafe = &led_power;
  19                 led-running = &led_power;
  20                 led-upgrade = &led_power;
  21         };
  22
  23         chosen {
  24                 /*
  25                  * bootargs forced by u-boot bootipq command:
  26                  * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
  27                  */
  28                 bootargs-append = " root=/dev/ubiblock0_1";
  29         };
  30
  31         gpio-restart {
  32                 compatible = "gpio-restart";
  33                 gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 led_internal: led-0 {
  40                         label = "blue:internal";
  41                         gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
  42                         default-state = "keep";
  43                 };
  44
  45                 led_power: led-1 {
  46                         function = LED_FUNCTION_POWER;
  47                         color = <LED_COLOR_ID_BLUE>;
  48                         gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
  49                         default-state = "keep";
  50                 };
  51
  52                 led-2 {
  53                         function = LED_FUNCTION_WLAN;
  54                         color = <LED_COLOR_ID_BLUE>;
  55                         gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
  56                         linux,default-trigger = "phy0tpt";
  57                 };
  58
  59                 led-3 {
  60                         function = LED_FUNCTION_WLAN;
  61                         color = <LED_COLOR_ID_RED>;
  62                         gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
  63                 };
  64
  65                 led-4 {
  66                         function = LED_FUNCTION_WLAN;
  67                         label = "blue:smart";
  68                         gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
  69                         linux,default-trigger = "phy1tpt";
  70                 };
  71
  72                 led-5 {
  73                         label = "red:smart";
  74                         gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
  75                 };
  76
  77                 resetzwave {
  78                         label = "resetzwave";
  79                         gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
  80                 };
  81         };
  82
  83         keys {
  84                 compatible = "gpio-keys";
  85
  86                 reset {
  87                         label = "reset";
  88                         linux,code = <KEY_RESTART>;
  89                         gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
  90                 };
  91
  92                 wps {
  93                         label = "wps";
  94                         linux,code = <KEY_WPS_BUTTON>;
  95                         gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
  96                 };
  97         };
  98
  99         soc {
 100                 rng@22000 {
 101                         status = "okay";
 102                 };
 103
 104                 mdio@90000 {
 105                         status = "okay";
 106                         pinctrl-0 = <&mdio_pins>;
 107                         pinctrl-names = "default";
 108                         reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
 109                         reset-delay-us = <2000>;
 110                 };
 111
 112                 tcsr@1949000 {
 113                         compatible = "qcom,tcsr";
 114                         reg = <0x1949000 0x100>;
 115                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
 116                 };
 117
 118                 tcsr@194b000 {
 119                         /* select hostmode */
 120                         compatible = "qcom,tcsr";
 121                         reg = <0x194b000 0x100>;
 122                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
 123                         status = "okay";
 124                 };
 125
 126                 ess_tcsr@1953000 {
 127                         compatible = "qcom,tcsr";
 128                         reg = <0x1953000 0x1000>;
 129                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
 130                 };
 131
 132                 tcsr@1957000 {
 133                         compatible = "qcom,tcsr";
 134                         reg = <0x1957000 0x100>;
 135                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
 136                 };
 137
 138                 crypto@8e3a000 {
 139                         status = "okay";
 140                 };
 141
 142                 watchdog@b017000 {
 143                         status = "okay";
 144                 };
 145         };
 146 };
 147
 148 &blsp_dma {
 149         status = "okay";
 150 };
 151
 152 &blsp1_spi1 {
 153         pinctrl-0 = <&spi_0_pins>;
 154         pinctrl-names = "default";
 155         status = "okay";
 156         cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 157
 158         flash@0 {
 159                 /* u-boot is looking for "n25q128a11" property */
 160                 compatible = "jedec,spi-nor", "n25q128a11";
 161                 #address-cells = <1>;
 162                 #size-cells = <1>;
 163                 reg = <0>;
 164                 spi-max-frequency = <24000000>;
 165
 166                 partitions {
 167                         compatible = "fixed-partitions";
 168                         #address-cells = <1>;
 169                         #size-cells = <1>;
 170
 171                         partition@0 {
 172                                 label = "0:SBL1";
 173                                 reg = <0x0 0x40000>;
 174                                 read-only;
 175                         };
 176
 177                         partition@40000 {
 178                                 label = "0:MIBIB";
 179                                 reg = <0x40000 0x20000>;
 180                                 read-only;
 181                         };
 182
 183                         partition@60000 {
 184                                 label = "0:QSEE";
 185                                 reg = <0x60000 0x60000>;
 186                                 read-only;
 187                                 };
 188
 189                         partition@c0000 {
 190                                 label = "0:CDT";
 191                                 reg = <0xc0000 0x10000>;
 192                                 read-only;
 193                         };
 194
 195                         partition@d0000 {
 196                                 label = "0:DDRPARAMS";
 197                                 reg = <0xd0000 0x10000>;
 198                                 read-only;
 199                         };
 200
 201                         partition@e0000 {
 202                                 label = "0:APPSBLENV";
 203                                 reg = <0xe0000 0x10000>;
 204                                 read-only;
 205                         };
 206
 207                         partition@f0000 {
 208                                 label = "0:APPSBL";
 209                                 reg = <0xf0000 0xc0000>;
 210                                 read-only;
 211                         };
 212
 213                         partition@1b0000 {
 214                                 label = "0:reserved1";
 215                                 reg = <0x1b0000 0x50000>;
 216                                 read-only;
 217                         };
 218                 };
 219         };
 220 };
 221
 222 &blsp1_uart1 {
 223         pinctrl-0 = <&serial_pins>;
 224         pinctrl-names = "default";
 225         status = "okay";
 226 };
 227
 228 &cryptobam {
 229         status = "okay";
 230 };
 231
 232 &gmac {
 233         status = "okay";
 234         nvmem-cell-names = "mac-address";
 235         nvmem-cells = <&macaddr_config_0 0>;
 236 };
 237
 238 &switch {
 239         status = "okay";
 240 };
 241
 242 &swport2 {
 243         status = "okay";
 244
 245         label = "wan";
 246
 247         nvmem-cell-names = "mac-address";
 248         nvmem-cells = <&macaddr_config_0 1>;
 249 };
 250
 251 &swport3 {
 252         status = "okay";
 253
 254         label = "lan";
 255 };
 256
 257 &nand {
 258         pinctrl-0 = <&nand_pins>;
 259         pinctrl-names = "default";
 260         status = "okay";
 261
 262         nand@0 {
 263                 partitions {
 264                         compatible = "fixed-partitions";
 265                         #address-cells = <1>;
 266                         #size-cells = <1>;
 267
 268                         partition@0 {
 269                                 label = "fota-flag";
 270                                 reg = <0x0 0xa0000>;
 271                                 read-only;
 272                         };
 273
 274                         partition@a0000 {
 275                                 label = "ART";
 276                                 reg = <0xa0000 0x80000>;
 277                                 read-only;
 278
 279                                 nvmem-layout {
 280                                         compatible = "fixed-layout";
 281                                         #address-cells = <1>;
 282                                         #size-cells = <1>;
 283
 284                                         precal_art_1000: precal@1000 {
 285                                                 reg = <0x1000 0x2f20>;
 286                                         };
 287
 288                                         precal_art_9000: precal@9000 {
 289                                                 reg = <0x9000 0x2f20>;
 290                                         };
 291                                 };
 292                         };
 293
 294                         partition@120000 {
 295                                 label = "mac";
 296                                 reg = <0x120000 0x80000>;
 297                                 read-only;
 298
 299                                 nvmem-layout {
 300                                         compatible = "fixed-layout";
 301                                         #address-cells = <1>;
 302                                         #size-cells = <1>;
 303
 304                                         macaddr_config_0: macaddr@0 {
 305                                                 compatible = "mac-base";
 306                                                 reg = <0x0 0x6>;
 307                                                 #nvmem-cell-cells = <1>;
 308                                         };
 309                                 };
 310                         };
 311
 312                         partition@1a0000 {
 313                                 label = "reserved2";
 314                                 reg = <0x1a0000 0xc0000>;
 315                                 read-only;
 316                         };
 317
 318                         partition@260000 {
 319                                 label = "cfg-param";
 320                                 reg = <0x260000 0x400000>;
 321                                 read-only;
 322                         };
 323
 324                         partition@660000 {
 325                                 label = "log";
 326                                 reg = <0x660000 0x400000>;
 327                         };
 328
 329                         partition@a60000 {
 330                                 label = "oops";
 331                                 reg = <0xa60000 0xa0000>;
 332                         };
 333
 334                         partition@b00000 {
 335                                 label = "reserved3";
 336                                 reg = <0xb00000 0x500000>;
 337                                 read-only;
 338                         };
 339
 340                         partition@1000000 {
 341                                 label = "web";
 342                                 reg = <0x1000000 0x800000>;
 343                         };
 344
 345                         partition@1800000 {
 346                                 label = "rootfs";
 347                                 reg = <0x1800000 0x1d00000>;
 348                         };
 349
 350                         partition@3500000 {
 351                                 label = "data";
 352                                 reg = <0x3500000 0x1900000>;
 353                         };
 354
 355                         partition@4e00000 {
 356                                 label = "fota";
 357                                 reg = <0x4e00000 0x2800000>;
 358
 359                         };
 360                         partition@7600000 {
 361                                 label = "iot-db";
 362                                 reg = <0x7600000 0xa00000>;
 363                         };
 364                 };
 365         };
 366 };
 367
 368 &qpic_bam {
 369         status = "okay";
 370 };
 371
 372 &tlmm {
 373         i2c_0_pins: i2c_0_pinmux {
 374                 mux {
 375                         pins = "gpio20", "gpio21";
 376                         function = "blsp_i2c0";
 377                         bias-disable;
 378                 };
 379         };
 380
 381         mdio_pins: mdio_pinmux {
 382                 mux_1 {
 383                         pins = "gpio6";
 384                         function = "mdio";
 385                         bias-pull-up;
 386                 };
 387
 388                 mux_2 {
 389                         pins = "gpio7";
 390                         function = "mdc";
 391                         bias-pull-up;
 392                 };
 393         };
 394
 395         nand_pins: nand_pins {
 396                 pullups {
 397                         pins =  "gpio52", "gpio53", "gpio58",
 398                                 "gpio59";
 399                         function = "qpic";
 400                         bias-pull-up;
 401                 };
 402
 403                 pulldowns {
 404                         pins =  "gpio54", "gpio55", "gpio56",
 405                                 "gpio57", "gpio60",
 406                                 "gpio62", "gpio63", "gpio64",
 407                                 "gpio65", "gpio66", "gpio67",
 408                                 "gpio69";
 409                         function = "qpic";
 410                         bias-pull-down;
 411                 };
 412         };
 413
 414         serial_pins: serial_pinmux {
 415                 mux {
 416                         pins = "gpio16", "gpio17";
 417                         function = "blsp_uart0";
 418                         bias-disable;
 419                 };
 420         };
 421
 422         spi_0_pins: spi_0_pinmux {
 423                 pinmux {
 424                         function = "blsp_spi0";
 425                         pins = "gpio13", "gpio14", "gpio15";
 426                         drive-strength = <12>;
 427                         bias-disable;
 428                 };
 429
 430                 pinmux_cs {
 431                         function = "gpio";
 432                         pins = "gpio12";
 433                         drive-strength = <2>;
 434                         bias-disable;
 435                         output-high;
 436                 };
 437         };
 438 };
 439
 440 &usb2_hs_phy {
 441         status = "okay";
 442 };
 443
 444 &usb2 {
 445         status = "okay";
 446 };
 447
 448 &usb3_ss_phy {
 449         status = "okay";
 450 };
 451
 452 &usb3_hs_phy {
 453         status = "okay";
 454 };
 455
 456 &usb3 {
 457         status = "okay";
 458 };
 459
 460 &wifi0 {
 461         status = "okay";
 462         nvmem-cell-names = "pre-calibration", "mac-address";
 463         nvmem-cells = <&precal_art_1000>, <&macaddr_config_0 2>;
 464         qcom,ath10k-calibration-variant = "ZTE-MF18A";
 465 };
 466
 467 //* This node is used for 5Ghz on QCA9982 */
 468 &pcie0 {
 469         status = "okay";
 470         perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
 471         wake-gpio = <&tlmm 40 GPIO_ACTIVE_LOW>;
 472         clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>;
 473
 474         bridge@0,0 {
 475                 reg = <0x00000000 0 0 0 0>;
 476                 #address-cells = <3>;
 477                 #size-cells = <2>;
 478                 ranges;
 479
 480                 wifi2: wifi@1,0 {
 481                         compatible = "pci168c,0040";
 482                         nvmem-cell-names = "pre-calibration", "mac-address";
 483                         nvmem-cells = <&precal_art_9000>, <&macaddr_config_0 3>;
 484                         qcom,ath10k-calibration-variant = "ZTE-MF18A";
 485                         reg = <0x00010000 0 0 0 0>;
 486                 };
 487         };
 488 };
 489
 490