1 include $(TOPDIR
)/rules.mk
2 include $(INCLUDE_DIR
)/image.mk
4 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
5 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
6 DEVICE_VARS
+= WRGG_DEVNAME WRGG_SIGNATURE
10 KERNEL_DEPENDS
= $$(wildcard $(DTS_DIR
)/$$(DEVICE_DTS
).dts
)
11 KERNEL_INITRAMFS_PREFIX
:= $$(IMG_PREFIX
)-$(1)-initramfs
12 KERNEL_PREFIX
:= $$(IMAGE_PREFIX
)
13 KERNEL_LOADADDR
:= 0x80208000
14 DEVICE_DTS
= $$(SOC
)-$(lastword
$(subst _
, ,$(1)))
15 SUPPORTED_DEVICES
:= $(subst _
,$(comma
),$(1))
16 IMAGES
:= sysupgrade.bin
17 IMAGE
/sysupgrade.bin
= sysupgrade-tar | append-metadata
18 IMAGE
/sysupgrade.bin
/squashfs
:=
21 define Device
/FitImage
22 KERNEL_SUFFIX
:= -fit-uImage.itb
23 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
27 define Device
/FitImageLzma
28 KERNEL_SUFFIX
:= -fit-uImage.itb
29 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
33 define Device
/FitzImage
34 KERNEL_SUFFIX
:= -fit-zImage.itb
35 KERNEL
= kernel-bin | fit none
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
41 IMAGES
:= nand-factory.ubi nand-sysupgrade.bin
42 IMAGE
/nand-factory.ubi
:= append-ubi
43 IMAGE
/nand-sysupgrade.bin
:= sysupgrade-tar | append-metadata
46 define Device
/DniImage
47 $(call Device
/FitzImage
)
51 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
52 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | \
53 append-rootfs | pad-rootfs | append-metadata | check-size
56 define Build
/append-rootfshdr
57 mkimage
-A
$(LINUX_KARCH
) \
58 -O linux
-T filesystem \
59 -C lzma
-a
$(KERNEL_LOADADDR
) -e
$(if
$(KERNEL_ENTRY
),$(KERNEL_ENTRY
),$(KERNEL_LOADADDR
)) \
60 -n root.squashfs
-d
$(IMAGE_ROOTFS
) $@.new
61 dd if
=$@.new bs
=64 count
=1 >> $(IMAGE_KERNEL
)
64 define Build
/mkmylofw_32m
65 $(eval device_id
=$(word 1,$(1)))
66 $(eval revision
=$(word 2,$(1)))
69 size
="$$(stat -c%s $@)" \
70 pad
="$(subst k,* 1024,$(BLOCKSIZE))" \
71 pad
="(pad - (size % pad)) % pad" \
72 newsize
='size + pad'; \
73 $(STAGING_DIR_HOST
)/bin
/mkmylofw \
74 -B WPE72
-i
0x11f6:$(device_id
):0x11f6:$(device_id
) -r
$(revision
) \
75 -s
0x2000000 -p0x180000
:$$newsize:al
:0x80208000:"OpenWrt":$@ \
80 define Build
/qsdk-ipq-factory-nand-askey
81 $(TOPDIR
)/scripts
/mkits-qsdk-ipq-image.sh
$@.its\
82 askey_kernel
$(IMAGE_KERNEL
) \
83 askey_fs
$(IMAGE_ROOTFS
) \
85 PATH
=$(LINUX_DIR
)/scripts
/dtc
:$(PATH
) mkimage
-f
$@.its
$@.new
90 -$(STAGING_DIR_HOST
)/bin
/mksenaofw \
91 -n
$(BOARD_NAME
) -r
$(VENDOR_ID
) -p
$(1) \
92 -c
$(DATECODE
) -w
$(2) -x
$(CW_VER
) -t
0 \
98 define Build
/wrgg-image
101 -d
"$(WRGG_DEVNAME)" \
102 -s
"$(WRGG_SIGNATURE)" \
107 define Device
/8dev_habanero-dvk
108 $(call Device
/FitImageLzma
)
109 DEVICE_VENDOR
:= 8devices
110 DEVICE_MODEL
:= Habanero DVK
113 DEVICE_PACKAGES
:= ipq-wifi-8dev_habanero-dvk
114 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
64k | append-rootfs | pad-rootfs | append-metadata | check-size
116 TARGET_DEVICES
+= 8dev_habanero-dvk
118 define Device
/8dev_jalapeno-common
119 $(call Device
/FitImage
)
120 $(call Device
/UbiFit
)
126 define Device
/8dev_jalapeno
127 $(call Device
/8dev_jalapeno-common
)
128 DEVICE_VENDOR
:= 8devices
129 DEVICE_MODEL
:= Jalapeno
131 TARGET_DEVICES
+= 8dev_jalapeno
133 define Device
/alfa-network_ap120c-ac
134 $(call Device
/FitImage
)
135 $(call Device
/UbiFit
)
136 DEVICE_VENDOR
:= ALFA Network
137 DEVICE_MODEL
:= AP120C-AC
139 DEVICE_PACKAGES
:= kmod-usb-acm \
140 kmod-tpm-i2c-atmel uboot-envtools
144 IMAGES
:= nand-factory.bin nand-sysupgrade.bin
145 IMAGE
/nand-factory.bin
:= append-ubi | qsdk-ipq-factory-nand
147 TARGET_DEVICES
+= alfa-network_ap120c-ac
149 define Device
/aruba_glenmorangie
150 $(call Device
/FitImageLzma
)
151 DEVICE_VENDOR
:= Aruba
153 DEVICE_PACKAGES
:= ipq-wifi-aruba_ap-303
156 define Device
/aruba_ap-303
157 $(call Device
/aruba_glenmorangie
)
158 DEVICE_MODEL
:= AP-303
160 TARGET_DEVICES
+= aruba_ap-303
162 define Device
/aruba_ap-303h
163 $(call Device
/aruba_glenmorangie
)
164 DEVICE_MODEL
:= AP-303H
166 TARGET_DEVICES
+= aruba_ap-303h
168 define Device
/aruba_ap-365
169 $(call Device
/aruba_glenmorangie
)
170 DEVICE_MODEL
:= AP-365
171 DEVICE_PACKAGES
+= kmod-hwmon-ad7418
173 TARGET_DEVICES
+= aruba_ap-365
175 define Device
/asus_map-ac2200
176 $(call Device
/FitImageLzma
)
177 DEVICE_VENDOR
:= ASUS
178 DEVICE_MODEL
:= Lyra
(MAP-AC2200
)
180 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct kmod-ath3k
182 TARGET_DEVICES
+= asus_map-ac2200
184 define Device
/asus_rt-ac58u
185 $(call Device
/FitImageLzma
)
186 DEVICE_VENDOR
:= ASUS
187 DEVICE_MODEL
:= RT-AC58U
192 IMAGE_SIZE
:= 20439364
193 FILESYSTEMS
:= squashfs
194 # Someone - in their infinite wisdom - decided to put the firmware
195 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
196 # Since u-boot works with strings we either need another fixup step
197 # to add a version... or we are very careful not to add '\0' into that
198 # string and call it a day.... Yeah, we do the latter!
199 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
200 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
201 kmod-usb-ledtrig-usbport
203 TARGET_DEVICES
+= asus_rt-ac58u
205 define Device
/avm_fritzbox-4040
206 $(call Device
/FitImageLzma
)
208 DEVICE_MODEL
:= FRITZ
!Box
4040
210 BOARD_NAME
:= fritz4040
212 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
213 UBOOT_PARTITION_SIZE
:= 524288
215 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
216 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
217 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
219 TARGET_DEVICES
+= avm_fritzbox-4040
221 define Device
/avm_fritzbox-7530
222 $(call Device
/FitImageLzma
)
224 DEVICE_MODEL
:= FRITZ
!Box
7530
226 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand
228 TARGET_DEVICES
+= avm_fritzbox-7530
230 define Device
/avm_fritzrepeater-1200
231 $(call Device
/FitImageLzma
)
233 DEVICE_MODEL
:= FRITZ
!Repeater
1200
235 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
237 TARGET_DEVICES
+= avm_fritzrepeater-1200
239 define Device
/avm_fritzrepeater-3000
240 $(call Device
/FitImageLzma
)
242 DEVICE_MODEL
:= FRITZ
!Repeater
3000
244 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
246 TARGET_DEVICES
+= avm_fritzrepeater-3000
248 define Device
/cellc_rtl30vw
249 KERNEL_SUFFIX
:= -fit-uImage.itb
250 KERNEL_INITRAMFS
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
251 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | uImage lzma | pad-to
2048
254 IMAGES
:= nand-factory.bin nand-sysupgrade.bin
255 IMAGE
/nand-factory.bin
:= append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
256 IMAGE
/nand-sysupgrade.bin
:= append-rootfshdr | sysupgrade-tar | append-metadata
257 DEVICE_VENDOR
:= Cell C
258 DEVICE_MODEL
:= RTL30VW
260 DEVICE_DTS_CONFIG
:= config@
5
266 DEVICE_PACKAGES
:= kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
268 TARGET_DEVICES
+= cellc_rtl30vw
270 define Device
/cilab_meshpoint-one
271 $(call Device
/8dev_jalapeno-common
)
272 DEVICE_VENDOR
:= Crisis Innovation Lab
273 DEVICE_MODEL
:= MeshPoint.One
274 DEVICE_PACKAGES
:= kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
276 TARGET_DEVICES
+= cilab_meshpoint-one
278 define Device
/compex_wpj419
279 $(call Device
/FitImage
)
280 $(call Device
/UbiFit
)
281 DEVICE_VENDOR
:= Compex
282 DEVICE_MODEL
:= WPJ419
284 DEVICE_DTS_CONFIG
:= config@
12
288 FILESYSTEMS
:= squashfs
290 TARGET_DEVICES
+= compex_wpj419
292 define Device
/compex_wpj428
293 $(call Device
/FitImage
)
294 DEVICE_VENDOR
:= Compex
295 DEVICE_MODEL
:= WPJ428
297 DEVICE_DTS_CONFIG
:= config@
4
301 IMAGES
+= cpximg-6a04.bin
302 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
303 IMAGE
/cpximg-6a04.bin
:= append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m
0x8A2 3
304 DEVICE_PACKAGES
:= kmod-gpio-beeper
306 TARGET_DEVICES
+= compex_wpj428
308 define Device
/dlink_dap-2610
309 $(call Device
/FitImageLzma
)
310 DEVICE_VENDOR
:= D-Link
311 DEVICE_MODEL
:= DAP-2610
313 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c1
315 WRGG_DEVNAME
:= /dev
/mtdblock
/8
316 WRGG_SIGNATURE
:= wapac30_dkbs_dap2610
318 IMAGES
+= factory.bin
319 # Bootloader expects a special 160 byte header which is added by
321 # Factory image size must be larger than 6MB, and size in wrgg header must
322 # match actual factory image size to be flashable from D-Link http server.
323 # Bootloader verifies checksum of wrgg image before booting, thus jffs2
324 # cannot be part of the wrgg image. This is solved in the factory image by
325 # having the rootfs at the end of the image (without pad-rootfs). And in
326 # the sysupgrade image only the kernel is included in the wrgg checksum,
327 # but this is not flashable from the D-link http server.
328 # append-rootfs must start on an erase block boundary.
329 IMAGE
/factory.bin
:= append-kernel | pad-offset
6144k
160 | append-rootfs | wrgg-image | check-size
330 IMAGE
/sysupgrade.bin
:= append-kernel | wrgg-image | pad-to
$$$$(BLOCKSIZE
) | append-rootfs | pad-rootfs | check-size | append-metadata
331 DEVICE_PACKAGES
:= ipq-wifi-dlink_dap2610
333 TARGET_DEVICES
+= dlink_dap-2610
335 define Device
/engenius_eap1300
336 $(call Device
/FitImage
)
337 DEVICE_VENDOR
:= EnGenius
338 DEVICE_MODEL
:= EAP1300
339 DEVICE_DTS_CONFIG
:= config@
4
340 BOARD_NAME
:= eap1300
344 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
346 TARGET_DEVICES
+= engenius_eap1300
348 define Device
/engenius_eap2200
349 $(call Device
/FitImage
)
350 $(call Device
/UbiFit
)
351 DEVICE_VENDOR
:= EnGenius
352 DEVICE_MODEL
:= EAP2200
356 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200
-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
358 TARGET_DEVICES
+= engenius_eap2200
360 define Device
/engenius_emd1
361 $(call Device
/FitImage
)
362 DEVICE_VENDOR
:= EnGenius
364 DEVICE_DTS_CONFIG
:= config@
4
367 IMAGES
+= factory.bin
368 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
369 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
371 TARGET_DEVICES
+= engenius_emd1
373 define Device
/engenius_emr3500
374 $(call Device
/FitImage
)
375 DEVICE_VENDOR
:= EnGenius
376 DEVICE_MODEL
:= EMR3500
377 DEVICE_DTS_CONFIG
:= config@
4
381 IMAGES
+= factory.bin
382 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
383 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
385 TARGET_DEVICES
+= engenius_emr3500
387 define Device
/engenius_ens620ext
388 $(call Device
/FitImage
)
389 DEVICE_VENDOR
:= EnGenius
390 DEVICE_MODEL
:= ENS620EXT
392 DEVICE_DTS_CONFIG
:= config@
4
395 BOARD_NAME
:= ENS620EXT
398 PRODUCT_ID_NEW
:= 0xA4
405 FILESYSTEMS
:= squashfs
406 IMAGES
+= factory_30.bin factory_35.bin
407 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
408 IMAGE
/factory_30.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | check-size | SenaoFW
$$$$(PRODUCT_ID
) $$$$(FW_VER
)
409 IMAGE
/factory_35.bin
:= qsdk-ipq-factory-nor | check-size | SenaoFW
$$$$(PRODUCT_ID_NEW
) $$$$(FW_VER_NEW
)
411 TARGET_DEVICES
+= engenius_ens620ext
413 define Device
/ezviz_cs-w3-wd1200g-eup
414 $(call Device
/FitImage
)
415 DEVICE_VENDOR
:= EZVIZ
416 DEVICE_MODEL
:= CS-W3-WD1200G
417 DEVICE_VARIANT
:= EUP
418 DEVICE_DTS_CONFIG
:= config@
4
421 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | \
423 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
424 ipq-wifi-ezviz_cs-w3-wd1200g-eup
426 TARGET_DEVICES
+= ezviz_cs-w3-wd1200g-eup
428 define Device
/glinet_gl-b1300
429 $(call Device
/FitImage
)
430 DEVICE_VENDOR
:= GL.iNet
431 DEVICE_MODEL
:= GL-B1300
432 BOARD_NAME
:= gl-b1300
436 IMAGE
/sysupgrade.bin
:= append-kernel |append-rootfs | pad-rootfs | append-metadata
438 TARGET_DEVICES
+= glinet_gl-b1300
440 define Device
/glinet_gl-s1300
441 $(call Device
/FitImage
)
442 DEVICE_VENDOR
:= GL.iNet
443 DEVICE_MODEL
:= GL-S1300
447 IMAGES
:= sysupgrade.bin
448 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
449 DEVICE_PACKAGES
:= ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
451 TARGET_DEVICES
+= glinet_gl-s1300
453 define Device
/linksys_ea6350v3
454 # The Linksys EA6350v3 has a uboot bootloader that does not
455 # support either booting lzma kernel images nor booting UBI
456 # partitions. This uboot, however, supports raw kernel images and
459 # As for the time of writing this, the device will boot the kernel
460 # from a fixed address with a fixed length of 3MiB. Also, the
461 # device has a hard-coded kernel command line that requieres the
462 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
463 # Oh... and the kernel partition overlaps with the rootfs
464 # partition (the same for alt_kernel and alt_rootfs).
466 # If you are planing re-partitioning the device, you may want to
467 # keep those details in mind:
468 # 1. The kernel adresses you should honor are 0x00000000 and
469 # 0x02800000 respectively.
470 # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
471 # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
472 # 4. The kernel command line from uboot is harcoded to boot with
473 # rootfs either in mtd11 or mtd13.
474 $(call Device
/FitzImage
)
475 DEVICE_VENDOR
:= Linksys
476 DEVICE_MODEL
:= EA6350
484 IMAGES
+= factory.bin
485 IMAGE
/factory.bin
:= append-kernel | append-uImage-fakehdr filesystem | pad-to
$$$$(KERNEL_SIZE
) | append-ubi | linksys-image type
=EA6350v3
486 DEVICE_PACKAGES
:= uboot-envtools
488 TARGET_DEVICES
+= linksys_ea6350v3
490 define Device
/linksys_ea8300
491 $(call Device
/FitzImage
)
492 DEVICE_VENDOR
:= Linksys
493 DEVICE_MODEL
:= EA8300
499 UBINIZE_OPTS
:= -E
5 # EOD marks to "hide" factory sig at EOF
500 IMAGES
+= factory.bin
501 IMAGE
/factory.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-ubi | linksys-image type
=EA8300
502 DEVICE_PACKAGES
:= uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
504 TARGET_DEVICES
+= linksys_ea8300
506 define Device
/meraki_mr33
507 $(call Device
/FitImage
)
508 DEVICE_VENDOR
:= Cisco Meraki
513 DEVICE_PACKAGES
:= -swconfig ath10k-firmware-qca9887-ct
515 TARGET_DEVICES
+= meraki_mr33
517 define Device
/mobipromo_cm520-79f
518 $(call Device
/FitzImage
)
519 $(call Device
/UbiFit
)
520 DEVICE_VENDOR
:= MobiPromo
521 DEVICE_MODEL
:= CM520-79F
525 DEVICE_PACKAGES
:= ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
527 TARGET_DEVICES
+= mobipromo_cm520-79f
529 define Device
/netgear_ex61x0v2
530 $(call Device
/DniImage
)
531 DEVICE_DTS_CONFIG
:= config@
4
532 NETGEAR_BOARD_ID
:= EX6150v2series
533 NETGEAR_HW_ID
:= 29765285+16+0+128+2x2
538 define Device
/netgear_ex6100v2
539 $(call Device
/netgear_ex61x0v2
)
540 DEVICE_VENDOR
:= Netgear
541 DEVICE_MODEL
:= EX6100
544 TARGET_DEVICES
+= netgear_ex6100v2
546 define Device
/netgear_ex6150v2
547 $(call Device
/netgear_ex61x0v2
)
548 DEVICE_VENDOR
:= Netgear
549 DEVICE_MODEL
:= EX6150
552 TARGET_DEVICES
+= netgear_ex6150v2
554 define Device
/openmesh_a42
555 $(call Device
/FitImageLzma
)
556 DEVICE_VENDOR
:= OpenMesh
559 DEVICE_DTS_CONFIG
:= config@om.a42
561 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
563 IMAGES
+= factory.bin
564 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A42
565 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
566 DEVICE_PACKAGES
:= uboot-envtools
568 TARGET_DEVICES
+= openmesh_a42
570 define Device
/openmesh_a62
571 $(call Device
/FitImageLzma
)
572 DEVICE_VENDOR
:= OpenMesh
575 DEVICE_DTS_CONFIG
:= config@om.a62
577 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
579 IMAGES
+= factory.bin
580 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A62
581 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
582 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct uboot-envtools
585 TARGET_DEVICES
+= openmesh_a62
587 define Device
/qcom_ap-dk01.1
-c1
588 DEVICE_VENDOR
:= Qualcomm Atheros
589 DEVICE_MODEL
:= AP-DK01.1
591 BOARD_NAME
:= ap-dk01.1
-c1
593 DEVICE_DTS
:= qcom-ipq4019-ap.dk01.1
-c1
597 $(call Device
/FitImage
)
598 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | append-metadata
600 TARGET_DEVICES
+= qcom_ap-dk01.1
-c1
602 define Device
/qcom_ap-dk04.1
-c1
603 $(call Device
/FitImage
)
604 $(call Device
/UbiFit
)
605 DEVICE_VENDOR
:= Qualcomm Atheros
606 DEVICE_MODEL
:= AP-DK04.1
609 DEVICE_DTS
:= qcom-ipq4019-ap.dk04.1
-c1
614 BOARD_NAME
:= ap-dk04.1
-c1
616 TARGET_DEVICES
+= qcom_ap-dk04.1
-c1
618 define Device
/qxwlan_e2600ac-c1
619 $(call Device
/FitImage
)
620 DEVICE_VENDOR
:= Qxwlan
621 DEVICE_MODEL
:= E2600AC
623 BOARD_NAME
:= e2600ac-c1
627 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
628 DEVICE_PACKAGES
:= ipq-wifi-qxwlan_e2600ac
630 TARGET_DEVICES
+= qxwlan_e2600ac-c1
632 define Device
/qxwlan_e2600ac-c2
633 $(call Device
/FitImage
)
634 $(call Device
/UbiFit
)
635 DEVICE_VENDOR
:= Qxwlan
636 DEVICE_MODEL
:= E2600AC
642 DEVICE_PACKAGES
:= ipq-wifi-qxwlan_e2600ac
644 TARGET_DEVICES
+= qxwlan_e2600ac-c2
646 define Device
/unielec_u4019-32m
647 $(call Device
/FitImage
)
648 DEVICE_VENDOR
:= Unielec
649 DEVICE_MODEL
:= U4019
650 DEVICE_VARIANT
:= 32M
651 BOARD_NAME
:= u4019-32m
655 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
657 TARGET_DEVICES
+= unielec_u4019-32m
659 define Device
/zyxel_nbg6617
660 $(call Device
/FitImageLzma
)
661 DEVICE_VENDOR
:= ZyXEL
662 DEVICE_MODEL
:= NBG6617
665 ROOTFS_SIZE
:= 24960k
667 RAS_ROOTFS_SIZE
:= 19840k
668 RAS_VERSION
:= "$(VERSION_DIST) $(REVISION)"
669 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
670 IMAGES
+= factory.bin
671 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
672 # at least as large as the one of the initial firmware image (not the current
673 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
674 # this minimum-size. However, the larger image can be flashed both ways.
675 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | pad-to
64k | check-size
$$$$(ROOTFS_SIZE
) | zyxel-ras-image separate-kernel
676 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | check-size
$$$$(ROOTFS_SIZE
) | sysupgrade-tar rootfs
=$$$$@ | append-metadata
677 DEVICE_PACKAGES
:= uboot-envtools kmod-usb-ledtrig-usbport
679 TARGET_DEVICES
+= zyxel_nbg6617
681 define Device
/zyxel_wre6606
682 $(call Device
/FitImage
)
683 DEVICE_VENDOR
:= ZyXEL
684 DEVICE_MODEL
:= WRE6606
685 DEVICE_DTS_CONFIG
:= config@
4
688 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
689 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
691 TARGET_DEVICES
+= zyxel_wre6606
693 $(eval
$(call BuildImage
))