1 include $(TOPDIR
)/rules.mk
2 include $(INCLUDE_DIR
)/image.mk
4 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
8 KERNEL_DEPENDS
= $$(wildcard $(DTS_DIR
)/$$(DEVICE_DTS
).dts
)
9 KERNEL_INITRAMFS_PREFIX
:= $$(IMG_PREFIX
)-$(1)-initramfs
10 KERNEL_PREFIX
:= $$(IMAGE_PREFIX
)
11 KERNEL_LOADADDR
:= 0x80208000
12 SUPPORTED_DEVICES
:= $(subst _
,$(comma
),$(1))
13 IMAGE
/sysupgrade.bin
= sysupgrade-tar | append-metadata
14 IMAGE
/sysupgrade.bin
/squashfs
:=
17 define Device
/FitImage
18 KERNEL_SUFFIX
:= -fit-uImage.itb
19 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
23 define Device
/FitImageLzma
24 KERNEL_SUFFIX
:= -fit-uImage.itb
25 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
29 define Device
/FitzImage
30 KERNEL_SUFFIX
:= -fit-zImage.itb
31 KERNEL
= kernel-bin | fit none
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
37 IMAGES
:= nand-factory.ubi nand-sysupgrade.bin
38 IMAGE
/nand-factory.ubi
:= append-ubi
39 IMAGE
/nand-sysupgrade.bin
:= sysupgrade-tar | append-metadata
42 define Device
/DniImage
43 KERNEL_SUFFIX
:= -fit-uImage.itb
44 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
48 IMAGES
:= factory.img sysupgrade.bin
49 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
50 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | append-metadata
52 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
55 define Device
/8dev_jalapeno
56 $(call Device
/FitImage
)
58 DEVICE_DTS
:= qcom-ipq4018-jalapeno
61 DEVICE_TITLE
:= 8devices Jalapeno
63 TARGET_DEVICES
+= 8dev_jalapeno
65 define Device
/asus_rt-ac58u
66 $(call Device
/FitImageLzma
)
67 DEVICE_DTS
:= qcom-ipq4018-rt-ac58u
71 DEVICE_TITLE
:= Asus RT-AC58U
72 IMAGE_SIZE
:= 20439364
73 FILESYSTEMS
:= squashfs
74 # Someone - in their infinite wisdom - decided to put the firmware
75 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
76 # Since u-boot works with strings we either need another fixup step
77 # to add a version... or we are very careful not to add '\0' into that
78 # string and call it a day.... Yeah, we do the latter!
79 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
80 IMAGES
:= sysupgrade.bin
81 DEVICE_PACKAGES
:= kmod-usb-ledtrig-usbport
83 TARGET_DEVICES
+= asus_rt-ac58u
85 define Device
/avm_fritzbox-4040
86 $(call Device
/FitImageLzma
)
87 DEVICE_DTS
:= qcom-ipq4018-fritz4040
88 BOARD_NAME
:= fritz4040
89 DEVICE_TITLE
:= AVM Fritz
!Box
4040
90 IMAGE_SIZE
:= 29753344
91 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
92 UBOOT_PARTITION_SIZE
:= 524288
93 IMAGES
= eva.bin sysupgrade.bin
94 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
95 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
96 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
98 TARGET_DEVICES
+= avm_fritzbox-4040
100 define Device
/compex_wpj428
101 $(call Device
/FitImage
)
102 DEVICE_DTS
:= qcom-ipq4028-wpj428
103 DEVICE_DTS_CONFIG
:= config@
4
105 DEVICE_TITLE
:= Compex WPJ428
108 IMAGES
= sysupgrade.bin
109 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
110 DEVICE_PACKAGES
:= kmod-gpio-beeper
112 TARGET_DEVICES
+= compex_wpj428
114 define Device
/engenius_eap1300
115 $(call Device
/FitImage
)
116 DEVICE_TITLE
:= EnGenius EAP1300
117 DEVICE_DTS_CONFIG
:= config@
4
118 BOARD_NAME
:= eap1300
119 DEVICE_DTS
:= qcom-ipq4018-eap1300
122 IMAGES
:= sysupgrade.bin
123 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
124 DEVICE_PACKAGES
:= ipq-wifi-engenius_eap1300
126 TARGET_DEVICES
+= engenius_eap1300
128 define Device
/glinet_gl-b1300
129 $(call Device
/FitImage
)
130 DEVICE_TITLE
:= GL.iNet GL-B1300
131 BOARD_NAME
:= gl-b1300
132 DEVICE_DTS
:= qcom-ipq4029-gl-b1300
135 IMAGES
:= sysupgrade.bin
136 IMAGE
/sysupgrade.bin
:= append-kernel |append-rootfs | pad-rootfs | append-metadata
138 TARGET_DEVICES
+= glinet_gl-b1300
140 define Device
/linksys_ea6350v3
141 # The Linksys EA6350v3 has a uboot bootloader that does not
142 # support either booting lzma kernel images nor booting UBI
143 # partitions. This uboot, however, supports raw kernel images and
146 # As for the time of writing this, the device will boot the kernel
147 # from a fixed address with a fixed length of 3MiB. Also, the
148 # device has a hard-coded kernel command line that requieres the
149 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
150 # Oh... and the kernel partition overlaps with the rootfs
151 # partition (the same for alt_kernel and alt_rootfs).
153 # If you are planing re-partitioning the device, you may want to
154 # keep those details in mind:
155 # 1. The kernel adresses you should honor are 0x00000000 and
156 # 0x02800000 respectively.
157 # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
158 # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
159 # 4. The kernel command line from uboot is harcoded to boot with
160 # rootfs either in mtd11 or mtd13.
161 $(call Device
/FitzImage
)
162 DEVICE_TITLE
:= Linksys EA6350v3
163 DEVICE_DTS
:= qcom-ipq4018-ea6350v3
166 KERNEL_SIZE
:= 3145728
167 IMAGE_SIZE
:= 38797312
169 IMAGES
:= factory.bin sysupgrade.bin
170 IMAGE
/factory.bin
:= append-kernel | append-uImage-fakehdr filesystem | pad-to
$$$${KERNEL_SIZE} | append-ubi | linksys-image type
=EA6350v3
171 DEVICE_PACKAGES
:= ipq-wifi-linksys_ea6350v3 uboot-envtools
173 TARGET_DEVICES
+= linksys_ea6350v3
175 define Device
/meraki_mr33
176 $(call Device
/FitImage
)
177 DEVICE_DTS
:= qcom-ipq4029-mr33
180 DEVICE_TITLE
:= Cisco Meraki MR33
181 IMAGES
= sysupgrade.bin
182 DEVICE_PACKAGES
:= -swconfig ath10k-firmware-qca9887-ct
184 TARGET_DEVICES
+= meraki_mr33
186 define Device
/netgear_ex61x0v2
187 $(call Device
/DniImage
)
188 DEVICE_DTS_CONFIG
:= config@
4
189 NETGEAR_BOARD_ID
:= EX6150v2series
190 NETGEAR_HW_ID
:= 29765285+16+0+128+2x2
193 define Device
/netgear_ex6100v2
194 $(call Device
/netgear_ex61x0v2
)
195 DEVICE_DTS
:= qcom-ipq4018-ex6100v2
196 DEVICE_TITLE
:= Netgear EX6100v2
198 TARGET_DEVICES
+= netgear_ex6100v2
200 define Device
/netgear_ex6150v2
201 $(call Device
/netgear_ex61x0v2
)
202 DEVICE_DTS
:= qcom-ipq4018-ex6150v2
203 DEVICE_TITLE
:= Netgear EX6150v2
205 TARGET_DEVICES
+= netgear_ex6150v2
207 define Device
/openmesh_a42
208 $(call Device
/FitImageLzma
)
209 DEVICE_DTS
:= qcom-ipq4018-a42
210 DEVICE_DTS_CONFIG
:= config@om.a42
212 DEVICE_TITLE
:= OpenMesh A42
213 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
215 IMAGES
= factory.bin sysupgrade.bin
216 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A42
217 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
218 DEVICE_PACKAGES
:= uboot-envtools
220 TARGET_DEVICES
+= openmesh_a42
222 define Device
/openmesh_a62
223 $(call Device
/FitImageLzma
)
224 DEVICE_DTS
:= qcom-ipq4019-a62
225 DEVICE_DTS_CONFIG
:= config@om.a62
227 DEVICE_TITLE
:= OpenMesh A62
228 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
230 IMAGES
= factory.bin sysupgrade.bin
231 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A62
232 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
233 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct uboot-envtools
236 TARGET_DEVICES
+= openmesh_a62
238 define Device
/qcom_ap-dk01.1
-c1
239 DEVICE_TITLE
:= QCA AP-DK01.1
-C1
240 BOARD_NAME
:= ap-dk01.1
-c1
241 DEVICE_DTS
:= qcom-ipq4019-ap.dk01.1
-c1
245 $(call Device
/FitImage
)
246 IMAGES
:= sysupgrade.bin
247 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
$$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
249 TARGET_DEVICES
+= qcom_ap-dk01.1
-c1
251 define Device
/qcom_ap-dk04.1
-c1
252 $(call Device
/FitImage
)
253 $(call Device
/UbiFit
)
254 DEVICE_DTS
:= qcom-ipq4019-ap.dk04.1
-c1
259 BOARD_NAME
:= ap-dk04.1
-c1
260 DEVICE_TITLE
:= QCA AP-DK04.1
-C1
262 TARGET_DEVICES
+= qcom_ap-dk04.1
-c1
264 define Device
/zyxel_nbg6617
265 $(call Device
/FitImageLzma
)
266 DEVICE_DTS
:= qcom-ipq4018-nbg6617
267 DEVICE_TITLE
:= ZyXEL NBG6617
268 ROOTFS_SIZE
:= 24960k
270 RAS_ROOTFS_SIZE
:= 19840k
271 RAS_VERSION
:= "$(VERSION_DIST) $(REVISION)"
272 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
273 IMAGES
:= sysupgrade.bin factory.bin
274 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
275 # at least as large as the one of the initial firmware image (not the current
276 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
277 # this minimum-size. However, the larger image can be flashed both ways.
278 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | pad-to
64k | check-size
$$$$(ROOTFS_SIZE
) | zyxel-ras-image separate-kernel
279 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | check-size
$$$$(ROOTFS_SIZE
) | sysupgrade-tar rootfs
=$$$$@ | append-metadata
280 DEVICE_PACKAGES
:= uboot-envtools kmod-usb-ledtrig-usbport
282 TARGET_DEVICES
+= zyxel_nbg6617
284 define Device
/zyxel_wre6606
285 $(call Device
/FitImage
)
286 DEVICE_TITLE
:= ZyXEL WRE6606
287 DEVICE_DTS_CONFIG
:= config@
4
288 DEVICE_DTS
:= qcom-ipq4018-wre6606
289 IMAGES
:= sysupgrade.bin
290 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
292 TARGET_DEVICES
+= zyxel_wre6606
294 $(eval
$(call BuildImage
))