1 #include "qcom-ipq8064-v2.0-smb208.dtsi"
3 #include <dt-bindings/input/input.h>
6 model = "Netgear Nighthawk X4 R7500v2";
7 compatible = "netgear,r7500v2", "qcom,ipq8064";
10 reg = <0x42000000 0x1e000000>;
11 device_type = "memory";
16 reg = <0x5fe00000 0x200000>;
25 led-failsafe = &power;
31 bootargs = "rootfstype=squashfs noinitrd";
35 compatible = "gpio-keys";
36 pinctrl-0 = <&button_pins>;
37 pinctrl-names = "default";
41 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
42 linux,code = <KEY_RFKILL>;
43 debounce-interval = <60>;
49 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_RESTART>;
51 debounce-interval = <60>;
57 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
58 linux,code = <KEY_WPS_BUTTON>;
59 debounce-interval = <60>;
65 compatible = "gpio-leds";
66 pinctrl-0 = <&led_pins>;
67 pinctrl-names = "default";
71 gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
76 gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
80 label = "amber:status";
81 gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
85 label = "white:internet";
86 gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
91 gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
96 gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
100 label = "white:esata";
101 gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
105 label = "white:power";
106 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
107 default-state = "keep";
111 label = "white:wifi";
112 gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
122 button_pins: button_pins {
124 pins = "gpio6", "gpio54", "gpio65";
126 drive-strength = <2>;
133 pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
134 "gpio24","gpio26", "gpio53", "gpio64";
136 drive-strength = <2>;
141 usb0_pwr_en_pins: usb0_pwr_en_pins {
145 drive-strength = <12>;
151 usb1_pwr_en_pins: usb1_pwr_en_pins {
153 pins = "gpio16", "gpio68";
155 drive-strength = <12>;
181 pinctrl-0 = <&usb0_pwr_en_pins>;
182 pinctrl-names = "default";
196 pinctrl-0 = <&usb1_pwr_en_pins>;
197 pinctrl-names = "default";
202 reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
203 pinctrl-0 = <&pcie0_pins>;
204 pinctrl-names = "default";
207 reg = <0x00000000 0 0 0 0>;
208 #address-cells = <3>;
213 compatible = "pci168c,0040";
214 reg = <0x00010000 0 0 0 0>;
216 nvmem-cells = <&macaddr_art_6 1>, <&precal_art_1000>;
217 nvmem-cell-names = "mac-address", "pre-calibration";
224 reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
225 pinctrl-0 = <&pcie1_pins>;
226 pinctrl-names = "default";
227 max-link-speed = <1>;
230 reg = <0x00000000 0 0 0 0>;
231 #address-cells = <3>;
236 compatible = "pci168c,0040";
237 reg = <0x00010000 0 0 0 0>;
239 nvmem-cells = <&macaddr_art_6 2>, <&precal_art_5000>;
240 nvmem-cell-names = "mac-address", "pre-calibration";
250 compatible = "qcom,nandcs";
252 nand-ecc-strength = <4>;
253 nand-bus-width = <8>;
254 nand-ecc-step-size = <512>;
257 qcom,boot-partitions = <0x0 0x1180000>;
260 compatible = "fixed-partitions";
261 #address-cells = <1>;
266 reg = <0x0000000 0x0c80000>;
272 reg = <0x0c80000 0x0500000>;
278 reg = <0x1180000 0x0080000>;
284 reg = <0x1200000 0x0140000>;
288 compatible = "fixed-layout";
289 #address-cells = <1>;
292 macaddr_art_0: macaddr@0 {
296 macaddr_art_6: macaddr@6 {
297 compatible = "mac-base";
299 #nvmem-cell-cells = <1>;
302 precal_art_1000: precal@1000 {
303 reg = <0x1000 0x2f20>;
306 precal_art_5000: precal@5000 {
307 reg = <0x5000 0x2f20>;
312 artbak: art@1340000 {
314 reg = <0x1340000 0x0140000>;
320 reg = <0x1480000 0x0400000>;
325 reg = <0x1880000 0x6080000>;
330 reg = <0x7900000 0x0700000>;
340 pinctrl-0 = <&mdio0_pins>;
341 pinctrl-names = "default";
344 compatible = "qca,qca8337";
345 #address-cells = <1>;
350 #address-cells = <1>;
358 tx-internal-delay-ps = <1000>;
359 rx-internal-delay-ps = <1000>;
370 phy-mode = "internal";
371 phy-handle = <&phy_port1>;
377 phy-mode = "internal";
378 phy-handle = <&phy_port2>;
384 phy-mode = "internal";
385 phy-handle = <&phy_port3>;
391 phy-mode = "internal";
392 phy-handle = <&phy_port4>;
398 phy-mode = "internal";
399 phy-handle = <&phy_port5>;
407 qca,sgmii-enable-pll;
417 #address-cells = <1>;
448 pinctrl-0 = <&rgmii2_pins>;
449 pinctrl-names = "default";
451 nvmem-cells = <&macaddr_art_6 0>;
452 nvmem-cell-names = "mac-address";
465 nvmem-cells = <&macaddr_art_0>;
466 nvmem-cell-names = "mac-address";