1 #include "qcom-ipq8065.dtsi"
3 #include <dt-bindings/input/input.h>
6 model = "ZyXEL NBG6817";
7 compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064";
10 reg = <0x42000000 0x1e000000>;
11 device_type = "memory";
19 led-failsafe = &power;
25 bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd";
26 append-rootblock = "root=/dev/mmcblk0p";
30 compatible = "gpio-keys";
31 pinctrl-0 = <&button_pins>;
32 pinctrl-names = "default";
36 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
37 linux,code = <KEY_RFKILL>;
38 linux,input-type = <EV_SW>;
43 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RESTART>;
49 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_WPS_BUTTON>;
55 compatible = "gpio-leds";
56 pinctrl-0 = <&led_pins>;
57 pinctrl-names = "default";
60 label = "white:internet";
61 gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
65 label = "white:power";
66 gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
67 default-state = "keep";
71 label = "amber:wifi2g";
72 gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
75 /* wifi2g amber from the manual is missing */
78 label = "amber:wifi5g";
79 gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
82 /* wifi5g amber from the manual is missing */
87 button_pins: button_pins {
89 pins = "gpio53", "gpio54", "gpio65";
98 pins = "gpio9", "gpio26", "gpio33", "gpio64";
100 drive-strength = <2>;
105 mdio0_pins: mdio0_pins {
112 rgmii2_pins: rgmii2_pins {
114 pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
122 drive-strength = <12>;
126 usb0_pwr_en_pins: usb0_pwr_en_pins {
128 pins = "gpio16", "gpio17";
130 drive-strength = <12>;
145 usb1_pwr_en_pins: usb1_pwr_en_pins {
147 pins = "gpio14", "gpio15";
149 drive-strength = <12>;
166 qcom,mode = <GSBI_PROT_SPI>;
172 pinctrl-0 = <&spi_pins>;
173 pinctrl-names = "default";
175 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
178 compatible = "jedec,spi-nor";
179 #address-cells = <1>;
181 spi-max-frequency = <51200000>;
185 compatible = "qcom,smem";
194 pinctrl-0 = <&usb0_pwr_en_pins>;
195 pinctrl-names = "default";
201 pinctrl-0 = <&usb1_pwr_en_pins>;
202 pinctrl-names = "default";
207 reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
208 pinctrl-0 = <&pcie0_pins>;
209 pinctrl-names = "default";
214 reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
215 pinctrl-0 = <&pcie1_pins>;
216 pinctrl-names = "default";
217 max-link-speed = <1>;
223 pinctrl-0 = <&mdio0_pins>;
224 pinctrl-names = "default";
227 phy0: ethernet-phy@0 {
229 qca,ar8327-initvals = <
230 0x00004 0x7600000 /* PAD0_MODE */
231 0x00008 0x1000000 /* PAD5_MODE */
232 0x0000c 0x80 /* PAD6_MODE */
233 0x000e4 0xaa545 /* MAC_POWER_SEL */
234 0x000e0 0xc74164de /* SGMII_CTRL */
235 0x0007c 0x4e /* PORT0_STATUS */
236 0x00094 0x4e /* PORT6_STATUS */
237 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
238 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
239 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
240 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
241 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
242 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
243 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
244 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
245 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
246 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
247 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
248 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
249 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
250 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
254 phy4: ethernet-phy@4 {
256 qca,ar8327-initvals = <
257 0x000e4 0x6a545 /* MAC_POWER_SEL */
258 0x0000c 0x80 /* PAD6_MODE */
267 qcom,phy_mdio_addr = <4>;
268 qcom,poll_required = <0>;
269 qcom,rgmii_delay = <1>;
270 qcom,phy_mii_type = <0>;
271 qcom,emulation = <0>;
275 pinctrl-0 = <&rgmii2_pins>;
276 pinctrl-names = "default";
288 qcom,phy_mdio_addr = <0>; /* none */
289 qcom,poll_required = <0>; /* no polling */
290 qcom,rgmii_delay = <0>;
291 qcom,phy_mii_type = <1>;
292 qcom,emulation = <0>;
303 sdcc1: sdcc@12400000 {