2 +++ b/arch/arm/boot/dts/kirkwood-on100.dts
6 +#include "kirkwood.dtsi"
7 +#include "kirkwood-6282.dtsi"
10 + model = "Cisco Systems ON100";
11 + compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
14 + device_type = "memory";
15 + reg = <0x00000000 0x20000000>;
23 + bootargs = "console=ttyS0,115200n8 earlyprintk";
24 + stdout-path = "serial0:115200n8";
28 + compatible = "gpio-keys";
29 + pinctrl-0 = <&pmx_btn_reset>;
30 + pinctrl-names = "default";
33 + label = "Reset Button";
34 + linux,code = <KEY_RESTART>;
35 + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
40 + compatible = "gpio-leds";
41 + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
42 + pinctrl-names = "default";
45 + label = "on100:green:health";
46 + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
50 + label = "on100:red:health";
51 + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
55 + label = "on100:green:health2";
56 + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
60 + label = "on100:red:health2";
61 + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
70 + phy-handle = <ðphy0>;
71 + phy-connection-type = "rgmii-id";
79 + phy-handle = <ðphy1>;
80 + phy-connection-type = "rgmii-id";
87 + ethphy0: ethernet-phy@0 {
88 + /* Marvell 88E1121R */
89 + compatible = "ethernet-phy-id0141.0cb0",
90 + "ethernet-phy-ieee802.3-c22";
94 + ethphy1: ethernet-phy@1 {
95 + /* Marvell 88E1121R */
96 + compatible = "ethernet-phy-id0141.0cb0",
97 + "ethernet-phy-ieee802.3-c22";
107 + reg = <0x00000000 0x000a0000>;
112 + label = "u-boot environment";
113 + reg = <0x000a0000 0x00020000>;
119 + reg = <0x000c0000 0x00540000>;
124 + reg = <0x00600000 0x1fa00000>;
129 + pmx_led_health_r: pmx-led-health-r {
130 + marvell,pins = "mpp45";
131 + marvell,function = "gpio";
134 + pmx_led_health_g: pmx-led-health-g {
135 + marvell,pins = "mpp44";
136 + marvell,function = "gpio";
139 + pmx_led_health2_r: pmx-led-health2-r {
140 + marvell,pins = "mpp47";
141 + marvell,function = "gpio";
144 + pmx_led_health2_g: pmx-led-health2-g {
145 + marvell,pins = "mpp46";
146 + marvell,function = "gpio";
149 + pmx_btn_reset: pmx-led-reset {
150 + marvell,pins = "mpp31";
151 + marvell,function = "gpio";
162 --- a/arch/arm/boot/dts/Makefile
163 +++ b/arch/arm/boot/dts/Makefile
164 @@ -290,6 +290,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
165 kirkwood-nsa310b.dtb \
166 kirkwood-nsa320.dtb \
167 kirkwood-nsa325.dtb \
168 + kirkwood-on100.dtb \
169 kirkwood-openblocks_a6.dtb \
170 kirkwood-openblocks_a7.dtb \
171 kirkwood-openrd-base.dtb \