3 /include/ "danube.dtsi"
6 model = "ARV7510PW22 - Astoria Networks";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
19 reg = <0x0 0x4000000>;
32 compatible = "lantiq,nor";
34 reg = <0 0x0 0x1000000>;
40 reg = <0x00000 0x40000>;
46 reg = <0x40000 0x20000>;
52 reg = <0x60000 0xf80000>;
56 label = "board_config";
57 reg = <0xfe0000 0x20000>;
63 compatible = "lantiq,eth-mac";
64 reg = <0 0xfe0016 0x6>;
69 gpio: pinmux@E100B10 {
70 pinctrl-names = "default";
71 pinctrl-0 = <&state_default>;
73 state_default: pinmux {
75 lantiq,groups = "exin1";
76 lantiq,function = "exin";
81 lantiq,groups = "req1", "req2";
82 lantiq,function = "pci";
83 lantiq,open-drain = <1>;
88 lantiq,groups = "gnt1";
89 lantiq,function = "pci";
98 lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
102 lantiq,pins = "io11", "io12", "io28";
103 lantiq,open-drain = <1>;
117 /* Switch reset 19 */
122 lantiq,external-clock;
124 0x7000 0 0 1 &icu0 30
125 0x7800 0 0 1 &icu0 135
126 0x7800 0 0 2 &icu0 135
127 0x7800 0 0 3 &icu0 135
129 gpio-reset = <&gpio 21 0>;
135 compatible = "ralink,eeprom";
136 ralink,eeprom = "RT2860.eeprom";
140 compatible = "gpio-keys-polled";
141 #address-cells = <1>;
143 poll-interval = <100>;
147 gpios = <&gpio 11 1>;
152 gpios = <&gpio 12 1>;
153 linux,code = <0x100>;
157 gpios = <&gpio 28 1>;
158 linux,code = <0x198>;
163 compatible = "gpio-leds";
174 gpios = <&gpio 10 1>;
178 gpios = <&gpio 15 1>;
182 gpios = <&gpio 20 1>;