5 #include <dt-bindings/input/input.h>
8 model = "ARV7519PW - Astoria Networks";
11 bootargs = "init=/etc/preinit";
16 led-failsafe = &power2;
20 led-internet = &online;
25 reg = <0x0 0x4000000>;
37 compatible = "lantiq,nor";
39 reg = <0 0x0 0x2000000>;
44 compatible = "fixed-partitions";
50 reg = <0x00000 0x40000>;
56 reg = <0x40000 0x20000>;
61 reg = <0x60000 0xf80000>;
64 boardconfig: partition@fe0000 {
65 label = "board_config";
66 reg = <0xfe0000 0x20000>;
73 gpio: pinmux@E100B10 {
74 pinctrl-names = "default";
75 pinctrl-0 = <&state_default>;
77 state_default: pinmux {
79 lantiq,groups = "ebu cs1";
80 lantiq,function = "ebu";
83 lantiq,groups = "req1";
84 lantiq,function = "pci";
85 lantiq,open-drain = <1>;
90 lantiq,groups = "gnt1";
91 lantiq,function = "pci";
101 lantiq,pins = "io19";
110 mtd-mac-address = <&boardconfig 0x16>;
113 /* warning: passive port
114 only works with active devices */
121 compatible = "gpio-keys-polled";
122 #address-cells = <1>;
124 poll-interval = <100>;
128 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
129 linux,code = <KEY_RFKILL>;
133 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
134 linux,code = <KEY_RESTART>;
139 compatible = "gpio-leds";
142 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
143 default-state = "keep";
147 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
151 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
155 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
159 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
163 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
167 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
171 gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
175 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
179 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
183 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
187 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
191 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
195 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
199 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
203 /* is there another way to "reserve" the GPIO? */
205 compatible = "gpio-export";
209 gpio-export,name = "switch";
210 gpio-export,output = <1>;
211 gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
218 lantiq,external-clock;
219 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
223 compatible = "pci0,0";
224 reg = <0x7000 0 0 0 0>;
225 ralink,mtd-eeprom = <&boardconfig 0x410>;
226 ralink,mtd-eeprom-swap;