5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube";
9 model = "Speedport W 504V Typ A";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_green;
17 led-failsafe = &power_red;
18 led-running = &power_green;
21 led-internet = &online_green;
22 led-wifi = &wireless_green;
26 reg = <0x0 0x4000000>;
32 gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
39 compatible = "lantiq,nor";
41 reg = <0 0x0 0x800000>;
46 compatible = "fixed-partitions";
52 reg = <0x00000 0x30000>; /* 192 KiB */
58 reg = <0x30000 0x10000>; /* 64 KiB */
64 reg = <0x40000 0x7B0000>; /* 7872 KiB */
67 art: partition@7F0000 {
69 reg = <0x7F0000 0x10000>; /* 64 KiB*/
76 gpio: pinmux@E100B10 {
77 pinctrl-names = "default";
78 pinctrl-0 = <&state_default>;
80 state_default: pinmux {
82 lantiq,groups = "req1";
83 lantiq,function = "pci";
84 lantiq,open-drain = <1>;
89 lantiq,groups = "gnt1";
90 lantiq,function = "pci";
107 mtd-mac-address = <&art 0x16>;
112 gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
113 lantiq,portmask = <0x3>;
118 compatible = "gpio-keys-polled";
119 #address-cells = <1>;
121 poll-interval = <100>;
125 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
126 linux,code = <KEY_WPS_BUTTON>;
130 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
131 linux,code = <KEY_RESTART>;
133 /* key DECT is missing */
137 compatible = "gpio-leds";
139 power_green: power-green {
140 label = "arv8539pw22:green:power";
141 gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
142 default-state = "keep";
144 power_red: power-red {
145 label = "arv8539pw22:red:power";
146 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
149 dsl_green: dsl-green {
150 label = "arv8539pw22:green:dsl";
151 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
154 online_green: online-green {
155 label = "arv8539pw22:green:online";
156 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
159 wireless_green: wireless-green {
160 label = "arv8539pw22:green:wlan";
161 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
164 telefonie green is missing
171 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
174 compatible = "pci168c,0029";
175 reg = <0x7000 0 0 0 0>;
176 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
177 mtd-mac-address = <&art 0x16>;
178 mtd-mac-address-increment = <1>;