5 #include <dt-bindings/input/input.h>
8 compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
9 model = "BT OpenReach VDSL Modem";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_green;
17 led-failsafe = &power_red;
18 led-running = &power_green;
24 reg = <0x0 0x2000000>;
30 compatible = "lantiq,nor";
32 reg = <0 0x0 0x0800000>;
37 compatible = "fixed-partitions";
48 reg = <0x30000 0x10000>;
53 reg = <0x40000 0x750000>;
58 reg = <0x790000 0x70000>;
65 gpio: pinmux@E100B10 {
66 pinctrl-names = "default";
67 pinctrl-0 = <&state_default>;
69 state_default: pinmux {
71 lantiq,groups = "mdio";
72 lantiq,function = "mdio";
79 compatible = "lantiq,phy-xrx200";
80 firmware1 = "lantiq/xrx200_phy22f_a14.bin"; /*VR9 1.1*/
81 firmware2 = "lantiq/xrx200_phy22f_a22.bin"; /*VR9 1.2*/
86 compatible = "gpio-keys-polled";
89 poll-interval = <100>;
93 gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
94 linux,code = <KEY_RESTART>;
99 compatible = "gpio-leds";
102 label = "asl56026:green:dsl";
103 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
106 /* power-* is a bicolour led */
107 power_green: power_green {
108 label = "asl56026:green:power";
109 gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
110 default-state = "keep";
113 power_red: power_red {
114 label = "asl56026:red:power";
115 gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
120 compatible = "gpio-export";
124 gpio-export,name = "power_led_blink";
125 gpio-export,output = <0>;
126 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
133 compatible = "lantiq,xrx200-pdi";
134 #address-cells = <1>;
140 compatible = "lantiq,xrx200-pdi-port";
143 phy-handle = <&phy11>;
147 compatible = "lantiq,xrx200-pdi-port";
150 phy-handle = <&phy14>;
156 #address-cells = <1>;
158 compatible = "lantiq,xrx200-mdio";
160 phy11: ethernet-phy@11 {
162 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
165 phy14: ethernet-phy@14 {
167 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";