6 model = "BTHOMEHUBV2B - BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
13 led-boot = &power_orange;
14 led-failsafe = &power_red;
15 led-running = &power_blue;
17 led-internet = &broadband_blue;
18 led-wifi = &wireless_blue;
21 memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
22 reg = <0x0 0x4000000>;
28 gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
34 nor-boot@0 { /* NOR Flash: Spansion S29AL004D 512KB */
35 compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
38 reg = <0 0x0 0x80000>;
43 compatible = "fixed-partitions";
49 reg = <0x00000 0x40000>; /* 256KB */
54 reg = <0x40000 0x10000>; /* 64KB */
59 reg = <0x50000 0x10000>;
64 reg = <0x60000 0x10000>;
68 label = "rg_conf_factory";
69 reg = <0x70000 0x10000>;
74 nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
75 compatible = "gen_nand", "lantiq,nand-xway";
78 reg = <1 0x0 0x2000000 >;
81 req-mask = <0x1>; /* PCI request lines to mask during NAND access */
84 compatible = "fixed-partitions";
88 ath9k_cal: partition@0 {
89 label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
90 reg = <0x00000 0x4000>;
96 reg = <0x4000 0x200000>;
101 reg = <0x204000 0x1DFC000>;
107 compatible = "ath9k,eeprom";
108 ath,eep-flash = <&ath9k_cal 0x0000>;
109 ath,mac-increment = <1>;
115 gpio: pinmux@E100B10 {
116 pinctrl-names = "default";
117 pinctrl-0 = <&state_default>;
119 state_default: pinmux {
121 lantiq,groups = "nand cle", "nand ale";
122 lantiq,function = "ebu";
124 lantiq,open-drain = <0>;
128 lantiq,groups = "nand cs1";
129 lantiq,function = "ebu";
130 lantiq,open-drain = <0>;
134 lantiq,groups = "exin1";
135 lantiq,function = "exin";
138 lantiq,groups = "req1";
139 lantiq,function = "pci";
141 lantiq,open-drain = <1>;
145 lantiq,groups = "gnt1";
146 lantiq,function = "pci";
148 lantiq,open-drain = <0>;
153 lantiq,pins = "io21";
155 lantiq,open-drain = <0>;
159 lantiq,pins = "io2", "io15", "io22";
161 lantiq,open-drain = <1>;
181 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
186 compatible = "gpio-keys-polled";
187 #address-cells = <1>;
189 poll-interval = <100>;
193 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
194 linux,code = <KEY_RESTART>;
197 label = "findhandset";
198 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
199 linux,code = <BTN_1>;
203 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
204 linux,code = <KEY_WPS_BUTTON>;
209 compatible = "gpio-leds";
212 label = "bthomehubv2b:orange:upgrading";
213 gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
217 label = "bthomehubv2b:orange:phone";
218 gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
221 label = "bthomehubv2b:blue:phone";
222 gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
226 label = "bthomehubv2b:orange:wireless";
227 gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
229 wireless_blue: wireless-blue {
230 label = "bthomehubv2b:blue:wireless";
231 gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
235 label = "bthomehubv2b:red:broadband";
236 gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
239 label = "bthomehubv2b:orange:broadband";
240 gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
242 broadband_blue: broadband-blue {
243 label = "bthomehubv2b:blue:broadband";
244 gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
247 power_red: power-red {
248 label = "bthomehubv2b:red:power";
249 gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
251 power_orange: power-orange {
252 label = "bthomehubv2b:orange:power";
253 gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
254 default-state = "keep";
256 power_blue: power-blue {
257 label = "bthomehubv2b:blue:power";
258 gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;