5 bootargs-append = "root= console=ttyLTQ0,115200";
18 reg = <0x0 0x4000000>;
22 gpio: pinmux@E100B10 {
23 pinctrl-names = "default";
24 pinctrl-0 = <&state_default>;
26 state_default: pinmux {
28 lantiq,groups = "exin1";
29 lantiq,function = "exin";
32 lantiq,groups = "gnt1", "req1";
33 lantiq,function = "pci";
36 lantiq,groups = "req1";
38 lantiq,open-drain = <1>;
42 lantiq,groups = "gnt1";
48 lantiq,open-drain = <1>;
52 lantiq,pins = "io10", "io17", "io18", "io21";
53 lantiq,open-drain = <0>;
61 mac-address = [ 00 11 22 33 44 55 ];
71 lantiq,bus-clock = <33333333>;
72 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
73 interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
74 gpio-reset = <&gpio 21 0>;
75 req-mask = <0x1>; /* GNT1 */
83 compatible = "spi-gpio";
85 gpio-miso = <&gpio 16 0>;
86 gpio-mosi = <&gpio 17 0>;
87 gpio-sck = <&gpio 18 0>;
88 num-chipselects = <1>;
89 cs-gpios = <&gpio 10 1>;
94 compatible = "jedec,spi-nor";
96 spi-max-frequency = <1000000>;
105 reg = <0x10000 0x10000>;
110 ath9k_cal: partition@20000 {
111 reg = <0x20000 0x10000>;
112 label = "calibration";
117 reg = <0x50000 0xfa0000>;
124 compatible = "ath9k,eeprom";
125 ath,eep-flash = <&ath9k_cal 0xf000>;
132 compatible = "rtl8366rb";
133 gpio-sda = <&gpio 35 0>;
134 gpio-sck = <&gpio 37 0>;
138 compatible = "gpio-keys-polled";
139 #address-cells = <1>;
141 poll-interval = <100>;
145 gpios = <&gpio 36 1>;
150 gpios = <&gpio 54 1>;
151 linux,code = <0x211>;
155 gpios = <&gpio 53 1>;
156 linux,code = <0x198>;
161 compatible = "gpio-leds";
172 gpios = <&gpio 22 1>;
176 gpios = <&gpio 34 1>;
180 gpios = <&gpio 39 1>;
184 gpios = <&gpio 51 1>;
188 gpios = <&gpio 52 1>;