5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
18 reg = <0x0 0x4000000>;
24 compatible = "lantiq,fpi", "simple-bus";
25 ranges = <0x0 0x10000000 0xEEFFFFF>;
26 reg = <0x10000000 0xEF00000>;
31 compatible = "lantiq,localbus", "simple-bus";
36 compatible = "lantiq,spi-xway-broken";
37 reg = <0xE100800 0x100>;
38 interrupt-parent = <&icu0>;
39 interrupts = <22 23 24>;
46 compatible = "jedec,spi-nor";
48 spi-max-frequency = <1000000>;
52 label = "SPI (RO) U-Boot Image";
57 reg = <0x20000 0x10000>;
63 reg = <0x30000 0x10000>;
69 reg = <0x40000 0x10000>;
75 reg = <0x50000 0x003a0000>;
81 gpio: pinmux@E100B10 {
82 compatible = "lantiq,pinctrl-xr9";
83 pinctrl-names = "default";
84 pinctrl-0 = <&state_default>;
86 interrupt-parent = <&icu0>;
87 interrupts = <166 135 66 40 41 42 38>;
91 reg = <0xE100B10 0xA0>;
93 state_default: pinmux {
95 lantiq,groups = "exin3";
96 lantiq,function = "exin";
99 lantiq,groups = "stp";
100 lantiq,function = "stp";
103 lantiq,groups = "spi", "spi_cs4";
104 lantiq,function = "spi";
107 lantiq,groups = "nand cle", "nand ale",
108 "nand rd", "nand rdy";
109 lantiq,function = "ebu";
112 lantiq,groups = "mdio";
113 lantiq,function = "mdio";
116 lantiq,groups = "gnt1", "req1";
117 lantiq,function = "pci";
120 lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
121 "io4", "io5", "io6", /* stp */
129 lantiq,pins = "io38";
134 lantiq,pins = "io39", /* exin3 */
135 "io48"; /* nand rdy */
142 #address-cells = <1>;
144 compatible = "lantiq,xrx200-net";
145 reg = < 0xE108000 0x3000 /* switch */
146 0xE10B100 0x70 /* mdio */
147 0xE10B1D8 0x30 /* mii */
148 0xE10B308 0x30 /* pmac */
150 interrupt-parent = <&icu0>;
151 interrupts = <73 72>;
154 compatible = "lantiq,xrx200-pdi";
155 #address-cells = <1>;
158 mac-address = [ 00 11 22 33 44 55 ];
161 compatible = "lantiq,xrx200-pdi-port";
164 phy-handle = <&phy0>;
167 compatible = "lantiq,xrx200-pdi-port";
170 phy-handle = <&phy1>;
173 compatible = "lantiq,xrx200-pdi-port";
176 phy-handle = <&phy11>;
181 compatible = "lantiq,xrx200-pdi";
182 #address-cells = <1>;
185 mac-address = [ 00 11 22 33 44 56 ];
188 compatible = "lantiq,xrx200-pdi-port";
191 phy-handle = <&phy5>;
196 compatible = "lantiq,xrx200-pdi";
197 #address-cells = <1>;
200 mac-address = [ 00 11 22 33 44 57 ];
202 compatible = "lantiq,xrx200-pdi-port";
205 phy-handle = <&phy13>;
210 #address-cells = <1>;
212 compatible = "lantiq,xrx200-mdio";
213 phy0: ethernet-phy@0 {
215 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
217 phy1: ethernet-phy@1 {
219 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
221 phy5: ethernet-phy@5 {
223 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
225 phy11: ethernet-phy@11 {
227 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
229 phy13: ethernet-phy@13 {
231 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
237 compatible = "lantiq,gpio-stp-xway";
238 reg = <0xE100BB0 0x40>;
242 lantiq,shadow = <0xffff>;
243 lantiq,groups = <0x7>;
252 gpios = <&gpio 33 0>;
253 lantiq,portmask = <0x3>;
257 #address-cells = <3>;
259 #interrupt-cells = <1>;
260 compatible = "lantiq,pci-xway1";
261 bus-range = <0x0 0x0>;
262 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
263 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
264 reg = <0x7000000 0x8000 /* config space */
265 0xE105400 0x400>; /* pci bridge */
266 lantiq,bus-clock = <33333333>;
267 /*lantiq,external-clock;*/
268 lantiq,delay-hi = <0>; /* 0ns delay */
269 lantiq,delay-lo = <0>; /* 0.0ns delay */
270 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
272 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
274 gpios-reset = <&gpio 21 0>;
275 req-mask = <0x1>; /* GNT1 */
280 compatible = "lantiq,phy-xrx200";
281 firmware = "lantiq/vr9_phy11g_a2x.bin";
286 compatible = "gpio-keys-polled";
287 #address-cells = <1>;
289 poll-interval = <100>;
293 linux,code = <0x198>;
297 gpios = <&gpio 11 1>;
298 linux,code = <0x100>;
303 compatible = "gpio-leds";
308 default-state = "keep";