5 #include <dt-bindings/input/input.h>
8 model = "FRITZ7320 - 1&1 HomeServer";
11 bootargs = "console=ttyLTQ0,115200";
16 led-failsafe = &power;
19 led-internet = &info_green;
25 reg = <0x0 0x4000000>;
31 compatible = "lantiq,nor";
33 reg = <0 0x0 0x1000000>;
38 compatible = "fixed-partitions";
42 ath9k_cal: partition@0 {
44 reg = <0x00000 0x20000>;
50 reg = <0x20000 0xf60000>;
55 reg = <0xf80000 0x40000>;
61 reg = <0xfc0000 0x40000>;
68 gpio: pinmux@E100B10 {
69 pinctrl-names = "default";
70 pinctrl-0 = <&state_default>;
72 state_default: pinmux {
74 lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
75 lantiq,function = "pci";
78 lantiq,groups = "req1", "req2", "req3", "req4";
80 lantiq,open-drain = <1>;
84 lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
93 mtd-mac-address = <&ath9k_cal 0xa91>;
94 mtd-mac-address-increment = <(-2)>;
103 compatible = "gpio-keys-polled";
104 #address-cells = <1>;
106 poll-interval = <100>;
110 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
111 linux,code = <KEY_RFKILL>;
115 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
116 linux,code = <KEY_PHONE>;
121 compatible = "gpio-leds";
123 label = "fritz7320:green:power";
124 gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
125 default-state = "keep";
128 label = "fritz7320:green:fon";
129 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
132 label = "fritz7320:green:dect";
133 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
136 label = "fritz7320:green:wlan";
137 gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
139 info_green: info_green {
140 label = "fritz7320:green:info";
141 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
144 label = "fritz7320:red:info";
145 gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
153 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
156 compatible = "pci0,0";
157 reg = <0x7000 0 0 0 0>;
158 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */