5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
14 compatible = "lantiq,spi-xway";
15 reg = <0xE100800 0x100>;
16 interrupt-parent = <&icu0>;
17 interrupts = <22 23 24>;
22 compatible = "jedec,spi-nor";
24 spi-max-frequency = <20000000>;
33 reg = <0x20000 0x6a0000>;
38 reg = <0x6c0000 0x100000>;
43 reg = <0x7c0000 0x10000>;
48 ath9k_cal: partition@7d0000 {
49 reg = <0x7d0000 0x30000>;
50 label = "boardconfig";
56 gpio: pinmux@E100B10 {
57 pinctrl-names = "default";
58 pinctrl-0 = <&state_default>;
60 state_default: pinmux {
62 lantiq,groups = "mdio";
63 lantiq,function = "mdio";
66 lantiq,groups = "gphy0 led1", "gphy1 led1";
67 lantiq,function = "gphy";
69 lantiq,open-drain = <0>;
75 lantiq,open-drain = <0>;
79 lantiq,groups = "spi", "spi_cs4";
80 lantiq,function = "spi";
93 compatible = "lantiq,xrx200-net";
94 reg = < 0xE108000 0x3000 /* switch */
95 0xE10B100 0x70 /* mdio */
96 0xE10B1D8 0x30 /* mii */
97 0xE10B308 0x30 /* pmac */
99 interrupt-parent = <&icu0>;
100 interrupts = <73 72>;
103 compatible = "lantiq,xrx200-pdi";
104 #address-cells = <1>;
107 mtd-mac-address = <&ath9k_cal 0xf100>;
111 compatible = "lantiq,xrx200-pdi-port";
114 phy-handle = <&phy0>;
115 // gpios = <&gpio 42 1>;
118 compatible = "lantiq,xrx200-pdi-port";
121 phy-handle = <&phy5>;
124 compatible = "lantiq,xrx200-pdi-port";
127 phy-handle = <&phy11>;
130 compatible = "lantiq,xrx200-pdi-port";
133 phy-handle = <&phy13>;
138 #address-cells = <1>;
140 compatible = "lantiq,xrx200-mdio";
141 phy0: ethernet-phy@0 {
143 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
145 phy5: ethernet-phy@5 {
147 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
149 phy11: ethernet-phy@11 {
151 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
153 phy13: ethernet-phy@13 {
155 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
162 gpios = <&gpio 33 0>;
163 lantiq,portmask = <0x3>;
168 gpios = <&gpio 33 0>;
173 compatible = "lantiq,phy-xrx200";
174 firmware = "lantiq/vr9_phy11g_a2x.bin";
179 compatible = "lantiq,pcie-xway";
183 compatible = "ath9k,eeprom";
184 ath,eep-flash = <&ath9k_cal 0x21000>;
185 ath,mac-offset = <0xf100>;
191 compatible = "gpio-keys-polled";
192 #address-cells = <1>;
194 poll-interval = <100>;
198 linux,code = <0x198>;
205 linux,input-type = <5>; /* EV_SW */
210 gpios = <&gpio 39 1>;
211 linux,code = <0x211>;
216 compatible = "gpio-leds";
228 gpios = <&gpio 19 0>;
232 gpios = <&gpio 20 0>;
236 gpios = <&gpio 37 0>;