5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
10 /* the power led can't be controlled, use the wps led instead */
18 reg = <0x0 0x4000000>;
23 compatible = "lantiq,spi-xway";
24 reg = <0xE100800 0x100>;
25 interrupt-parent = <&icu0>;
26 interrupts = <22 23 24>;
32 compatible = "jedec,spi-nor";
34 spi-max-frequency = <33250000>;
44 reg = <0x20000 0x7a0000>;
49 reg = <0x7c0000 0x10000>;
54 ath9k_cal: partition@7d0000 {
55 reg = <0x7d0000 0x30000>;
56 label = "boardconfig";
62 gpio: pinmux@E100B10 {
63 pinctrl-names = "default";
64 pinctrl-0 = <&state_default>;
66 state_default: pinmux {
68 lantiq,groups = "mdio";
69 lantiq,function = "mdio";
72 lantiq,groups = "gphy0 led1", "gphy1 led1";
73 lantiq,function = "gphy";
75 lantiq,open-drain = <0>;
81 lantiq,open-drain = <0>;
85 lantiq,groups = "spi", "spi_cs4";
86 lantiq,function = "spi";
99 compatible = "lantiq,xrx200-net";
100 reg = < 0xE108000 0x3000 /* switch */
101 0xE10B100 0x70 /* mdio */
102 0xE10B1D8 0x30 /* mii */
103 0xE10B308 0x30 /* pmac */
105 interrupt-parent = <&icu0>;
106 interrupts = <73 72>;
109 compatible = "lantiq,xrx200-pdi";
110 #address-cells = <1>;
113 mtd-mac-address = <&ath9k_cal 0xf100>;
117 compatible = "lantiq,xrx200-pdi-port";
120 phy-handle = <&phy0>;
121 // gpios = <&gpio 42 1>;
124 compatible = "lantiq,xrx200-pdi-port";
127 phy-handle = <&phy5>;
130 compatible = "lantiq,xrx200-pdi-port";
133 phy-handle = <&phy11>;
136 compatible = "lantiq,xrx200-pdi-port";
139 phy-handle = <&phy13>;
144 #address-cells = <1>;
146 compatible = "lantiq,xrx200-mdio";
147 phy0: ethernet-phy@0 {
149 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
151 phy5: ethernet-phy@5 {
153 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
155 phy11: ethernet-phy@11 {
157 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
159 phy13: ethernet-phy@13 {
161 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
168 gpios = <&gpio 33 0>;
169 lantiq,portmask = <0x3>;
174 gpios = <&gpio 33 0>;
179 compatible = "lantiq,phy-xrx200";
180 firmware = "lantiq/vr9_phy11g_a2x.bin";
185 compatible = "lantiq,pcie-xway";
189 compatible = "ath9k,eeprom";
190 ath,eep-flash = <&ath9k_cal 0x21000>;
191 ath,mac-offset = <0xf100>;
199 compatible = "gpio-keys-polled";
200 #address-cells = <1>;
202 poll-interval = <100>;
206 linux,code = <0x198>;
213 linux,input-type = <5>; /* EV_SW */
218 gpios = <&gpio 39 1>;
219 linux,code = <0x211>;
224 compatible = "gpio-leds";
236 gpios = <&gpio 19 0>;
240 gpios = <&gpio 20 0>;
244 gpios = <&gpio 37 0>;