5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
14 compatible = "lantiq,spi-xway";
15 reg = <0xE100800 0x100>;
16 interrupt-parent = <&icu0>;
17 interrupts = <22 23 24>;
23 compatible = "jedec,spi-nor";
25 spi-max-frequency = <33250000>;
35 reg = <0x20000 0x7a0000>;
40 reg = <0x7c0000 0x10000>;
45 ath9k_cal: partition@7d0000 {
46 reg = <0x7d0000 0x30000>;
47 label = "boardconfig";
53 gpio: pinmux@E100B10 {
54 pinctrl-names = "default";
55 pinctrl-0 = <&state_default>;
57 state_default: pinmux {
59 lantiq,groups = "mdio";
60 lantiq,function = "mdio";
63 lantiq,groups = "gphy0 led1", "gphy1 led1";
64 lantiq,function = "gphy";
66 lantiq,open-drain = <0>;
72 lantiq,open-drain = <0>;
76 lantiq,groups = "spi", "spi_cs4";
77 lantiq,function = "spi";
90 compatible = "lantiq,xrx200-net";
91 reg = < 0xE108000 0x3000 /* switch */
92 0xE10B100 0x70 /* mdio */
93 0xE10B1D8 0x30 /* mii */
94 0xE10B308 0x30 /* pmac */
96 interrupt-parent = <&icu0>;
100 compatible = "lantiq,xrx200-pdi";
101 #address-cells = <1>;
104 mtd-mac-address = <&ath9k_cal 0xf100>;
108 compatible = "lantiq,xrx200-pdi-port";
111 phy-handle = <&phy0>;
112 // gpios = <&gpio 42 1>;
115 compatible = "lantiq,xrx200-pdi-port";
118 phy-handle = <&phy5>;
121 compatible = "lantiq,xrx200-pdi-port";
124 phy-handle = <&phy11>;
127 compatible = "lantiq,xrx200-pdi-port";
130 phy-handle = <&phy13>;
135 #address-cells = <1>;
137 compatible = "lantiq,xrx200-mdio";
138 phy0: ethernet-phy@0 {
140 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
142 phy5: ethernet-phy@5 {
144 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
146 phy11: ethernet-phy@11 {
148 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
150 phy13: ethernet-phy@13 {
152 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
159 gpios = <&gpio 33 0>;
160 lantiq,portmask = <0x3>;
165 gpios = <&gpio 33 0>;
170 compatible = "lantiq,phy-xrx200";
171 firmware = "lantiq/vr9_phy11g_a2x.bin";
176 compatible = "lantiq,pcie-xway";
180 compatible = "ath9k,eeprom";
181 ath,eep-flash = <&ath9k_cal 0x21000>;
182 ath,mac-offset = <0xf100>;
190 compatible = "gpio-keys-polled";
191 #address-cells = <1>;
193 poll-interval = <100>;
197 linux,code = <0x198>;
204 linux,input-type = <5>; /* EV_SW */
209 gpios = <&gpio 39 1>;
210 linux,code = <0x211>;
215 compatible = "gpio-leds";
227 gpios = <&gpio 19 0>;
231 gpios = <&gpio 20 0>;
235 gpios = <&gpio 37 0>;