3 #include <dt-bindings/input/input.h>
7 bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
11 led-boot = &power_green;
12 led-failsafe = &power_red;
13 led-running = &power_green;
16 led-internet = &internet_green;
23 gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
24 &gpio 31 GPIO_ACTIVE_HIGH //still unknown
25 &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
30 reg = <0x0 0x4000000>;
36 compatible = "lantiq,nor";
38 reg = <0 0x0 0x1000000>;
43 compatible = "fixed-partitions";
47 boardconfig: partition@fe0000 {
48 label = "board_config";
49 reg = <0xfe0000 0x20000>;
56 gpio: pinmux@E100B10 {
57 pinctrl-names = "default";
58 pinctrl-0 = <&state_default>;
60 state_default: pinmux {
62 lantiq,groups = "gphy0 led0", "gphy0 led1",
63 "gphy1 led0", "gphy1 led1";
64 lantiq,function = "gphy";
65 lantiq,open-drain = <0>;
70 lantiq,groups = "mdio";
71 lantiq,function = "mdio";
75 lantiq,open-drain = <0>;
84 gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
93 compatible = "lantiq,phy-xrx200";
94 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
95 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
100 compatible = "gpio-keys-polled";
101 #address-cells = <1>;
103 poll-interval = <100>;
107 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
108 linux,code = <KEY_RESTART>;
113 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
114 linux,code = <KEY_WPS_BUTTON>;
119 compatible = "gpio-leds";
122 label = "vgv7510kw22:green:dsl";
123 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
127 label = "vgv7510kw22:red:internet";
128 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
132 label = "vgv7510kw22:red:info";
133 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
137 label = "vgv7510kw22:green:power";
138 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
139 default-state = "keep";
143 label = "vgv7510kw22:green:info";
144 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
147 internet_green: internet_green {
148 label = "vgv7510kw22:green:internet";
149 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
153 label = "vgv7510kw22:green:wlan";
154 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
158 label = "vgv7510kw22:red:power";
159 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
163 label = "vgv7510kw22:green:telefon";
164 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
171 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
174 compatible = "pci1814,3592";
175 reg = <0x7000 0 0 0 0>;
176 ralink,mtd-eeprom = <&boardconfig 0x410>;
177 ralink,mtd-eeprom-swap;
178 mtd-mac-address = <&boardconfig 0x16>;
179 mtd-mac-address-increment = <1>;
185 compatible = "lantiq,xrx200-pdi";
186 #address-cells = <1>;
189 mtd-mac-address = <&boardconfig 0x16>;
193 compatible = "lantiq,xrx200-pdi-port";
196 phy-handle = <&phy11>;
199 compatible = "lantiq,xrx200-pdi-port";
202 phy-handle = <&phy12>;
205 compatible = "lantiq,xrx200-pdi-port";
208 phy-handle = <&phy13>;
211 compatible = "lantiq,xrx200-pdi-port";
214 phy-handle = <&phy14>;
219 compatible = "lantiq,xrx200-pdi";
220 #address-cells = <1>;
223 mtd-mac-address = <&boardconfig 0x16>;
224 mtd-mac-address-increment = <3>;
228 compatible = "lantiq,xrx200-pdi-port";
231 phy-handle = <&phy1>;
236 #address-cells = <1>;
238 compatible = "lantiq,xrx200-mdio";
240 phy1: ethernet-phy@1 {
242 compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
245 phy11: ethernet-phy@11 {
247 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
249 phy12: ethernet-phy@12 {
251 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
253 phy13: ethernet-phy@13 {
255 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
257 phy14: ethernet-phy@14 {
259 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";