4 model = "VGV7510KW22 - o2 Box 6431";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 failsafe = &power_red;
12 running = &power_green;
15 internet = &internet_green;
21 reg = <0x0 0x4000000>;
27 compatible = "lantiq,nor";
29 reg = <0 0x0 0x1000000>;
34 compatible = "fixed-partitions";
38 boardconfig: partition@fe0000 {
39 label = "board_config";
40 reg = <0xfe0000 0x20000>;
47 gpio: pinmux@E100B10 {
48 pinctrl-names = "default";
49 pinctrl-0 = <&state_default>;
51 state_default: pinmux {
58 lantiq,groups = "gphy0 led0", "gphy0 led1",
59 "gphy1 led0", "gphy1 led1";
60 lantiq,function = "gphy";
61 lantiq,open-drain = <0>;
66 lantiq,groups = "mdio";
67 lantiq,function = "mdio";
71 lantiq,open-drain = <0>;
85 lantiq,bus-clock = <33333333>;
86 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
88 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
90 gpio-reset = <&gpio 21 0>;
91 req-mask = <0x1>; /* GNT1 */
100 compatible = "lantiq,phy-xrx200";
101 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
102 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
107 compatible = "ralink,eeprom";
108 ralink,eeprom = "RT3062.eeprom";
112 compatible = "gpio-keys-polled";
113 #address-cells = <1>;
115 poll-interval = <100>;
120 linux,code = <0x198>;
126 linux,code = <0x211>;
131 compatible = "gpio-leds";
134 label = "vgv7510kw22:green:dsl";
139 label = "vgv7510kw22:red:internet";
140 gpios = <&gpio 10 1>;
144 label = "vgv7510kw22:red:info";
145 gpios = <&gpio 12 1>;
149 label = "vgv7510kw22:green:power";
150 gpios = <&gpio 14 1>;
151 default-state = "keep";
155 label = "vgv7510kw22:green:info";
156 gpios = <&gpio 15 1>;
159 internet_green: internet_green {
160 label = "vgv7510kw22:green:internet";
161 gpios = <&gpio 19 1>;
165 label = "vgv7510kw22:green:wlan";
166 gpios = <&gpio 20 1>;
170 label = "vgv7510kw22:red:power";
171 gpios = <&gpio 28 1>;
175 label = "vgv7510kw22:green:telefon";
176 gpios = <&gpio 29 1>;
183 compatible = "lantiq,xrx200-pdi";
184 #address-cells = <1>;
187 mtd-mac-address = <&boardconfig 0x16>;
191 compatible = "lantiq,xrx200-pdi-port";
194 phy-handle = <&phy11>;
197 compatible = "lantiq,xrx200-pdi-port";
200 phy-handle = <&phy12>;
203 compatible = "lantiq,xrx200-pdi-port";
206 phy-handle = <&phy13>;
209 compatible = "lantiq,xrx200-pdi-port";
212 phy-handle = <&phy14>;
217 #address-cells = <1>;
219 compatible = "lantiq,xrx200-mdio";
221 phy11: ethernet-phy@11 {
223 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
225 phy12: ethernet-phy@12 {
227 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
229 phy13: ethernet-phy@13 {
231 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
233 phy14: ethernet-phy@14 {
235 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";