5 model = "VGV7519 - KPN Experiabox V8";
8 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
15 dsl = &broadband_yellow;
16 internet = &internet_yellow;
17 wifi = &wireless_yellow;
22 reg = <0x0 0x4000000>;
28 compatible = "lantiq,fpi", "simple-bus";
29 ranges = <0x0 0x10000000 0xEEFFFFF>;
30 reg = <0x10000000 0xEF00000>;
35 compatible = "lantiq,localbus", "simple-bus";
38 gpio: pinmux@E100B10 {
39 compatible = "lantiq,pinctrl-xr9";
40 pinctrl-names = "default";
41 pinctrl-0 = <&state_default>;
43 interrupt-parent = <&icu0>;
44 interrupts = <166 135 66 40 41 42 38>;
48 reg = <0xE100B10 0xA0>;
50 state_default: pinmux {
52 lantiq,groups = "stp";
53 lantiq,function = "stp";
56 lantiq,groups = "spi";
57 lantiq,function = "spi";
60 lantiq,groups = "mdio";
61 lantiq,function = "mdio";
64 lantiq,pins = "io7", "io44";
69 lantiq,pins = "io4", "io5", "io6";
70 lantiq,open-drain = <0>;
76 lantiq,open-drain = <0>;
81 lantiq,groups = "gphy0 led1", "gphy1 led0";
82 lantiq,function = "gphy";
83 lantiq,open-drain = <0>;
93 compatible = "lantiq,xrx200-net";
94 reg = < 0xE108000 0x3000 /* switch */
95 0xE10B100 0x70 /* mdio */
96 0xE10B1D8 0x30 /* mii */
97 0xE10B308 0x30 /* pmac */
99 interrupt-parent = <&icu0>;
100 interrupts = <73 72>;
103 compatible = "lantiq,xrx200-pdi";
104 #address-cells = <1>;
107 mac-address = [ 00 11 22 33 44 55 ];
110 compatible = "lantiq,xrx200-pdi-port";
113 phy-handle = <&phy0>;
116 compatible = "lantiq,xrx200-pdi-port";
119 phy-handle = <&phy1>;
122 compatible = "lantiq,xrx200-pdi-port";
125 phy-handle = <&phy11>;
128 compatible = "lantiq,xrx200-pdi-port";
131 phy-handle = <&phy13>;
136 compatible = "lantiq,xrx200-pdi";
137 #address-cells = <1>;
140 mac-address = [ 00 11 22 33 44 56 ];
143 compatible = "lantiq,xrx200-pdi-port";
146 phy-handle = <&phy5>;
151 #address-cells = <1>;
153 compatible = "lantiq,xrx200-mdio";
154 phy0: ethernet-phy@0 {
156 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
157 lantiq,c45-reg-init = <1 0 0 0>;
159 phy1: ethernet-phy@1 {
161 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
162 lantiq,c45-reg-init = <1 0 0 0>;
164 phy5: ethernet-phy@5 {
166 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
167 lantiq,c45-reg-init = <1 0 0 0>;
169 phy11: ethernet-phy@11 {
171 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
172 lantiq,c45-reg-init = <1 0 0 0>;
174 phy13: ethernet-phy@13 {
176 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
177 lantiq,c45-reg-init = <1 0 0 0>;
183 compatible = "lantiq,gpio-stp-xway";
184 reg = <0xE100BB0 0x40>;
188 lantiq,shadow = <0xffff>;
189 lantiq,groups = <0x3>;
198 gpios = <&gpio 32 0>;
199 lantiq,portmask = <0x3>;
204 #address-cells = <3>;
206 #interrupt-cells = <1>;
207 compatible = "lantiq,pci-xway";
208 bus-range = <0x0 0x0>;
209 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
210 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
211 reg = <0x7000000 0x8000 /* config space */
212 0xE105400 0x400>; /* pci bridge */
213 lantiq,bus-clock = <33333333>;
214 /*lantiq,external-clock;*/
215 lantiq,delay-hi = <0>; /* 0ns delay */
216 lantiq,delay-lo = <0>; /* 0.0ns delay */
217 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
219 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
221 gpio-reset = <&gpio 21 0>;
222 req-mask = <0x1>; /* GNT1 */
231 compatible = "lantiq,phy-xrx200";
232 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
233 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
238 compatible = "ralink,eeprom";
239 ralink,eeprom = "RT2860.eeprom";
243 compatible = "gpio-keys-polled";
244 #address-cells = <1>;
246 poll-interval = <100>;
250 linux,code = <0x198>;
254 gpios = <&gpio 41 1>;
259 gpios = <&gpio 45 1>;
264 gpios = <&gpio 10 1>;
265 linux,code = <0x211>;
270 compatible = "gpio-leds";
280 wps_yellow { /* yellow */
281 label = "wps_yellow";
292 internet_yellow: internet_yellow { /* yellow */
293 label = "internet_yellow";
296 internet_red { /* red */
297 label = "internet_red";
300 broadband_red { /* red */
301 label = "broadband_red";
304 broadband_yellow: broadband_yellow { /* yellow */
305 label = "broadband_yellow";
312 wireless_red { /* red */
313 label = "wireless_red";
316 wireless_yellow: wireless_yellow { /* yellow */
317 label = "wireless_yellow";
320 power2: power2 { /* yellow */
323 default-state = "keep";
325 power: power { /* red */