5 model = "VGV7519 - KPN Experiabox V8";
8 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
12 reg = <0x0 0x4000000>;
18 compatible = "lantiq,fpi", "simple-bus";
19 ranges = <0x0 0x10000000 0xEEFFFFF>;
20 reg = <0x10000000 0xEF00000>;
25 compatible = "lantiq,localbus", "simple-bus";
28 gpio: pinmux@E100B10 {
29 compatible = "lantiq,pinctrl-xr9";
30 pinctrl-names = "default";
31 pinctrl-0 = <&state_default>;
33 interrupt-parent = <&icu0>;
34 interrupts = <166 135 66 40 41 42 38>;
38 reg = <0xE100B10 0xA0>;
40 state_default: pinmux {
42 lantiq,groups = "stp";
43 lantiq,function = "stp";
46 lantiq,groups = "spi", "spi_cs4";
47 lantiq,function = "spi";
50 lantiq,groups = "mdio";
51 lantiq,function = "mdio";
54 lantiq,pins = "io7", "io44";
59 lantiq,pins = "io4", "io5", "io6", /* stp */
67 lantiq,groups = "gphy0 led1", "gphy1 led0";
68 lantiq,function = "gphy";
69 lantiq,open-drain = <0>;
77 compatible = "lantiq,xrx200-net";
78 reg = < 0xE108000 0x3000 /* switch */
79 0xE10B100 0x70 /* mdio */
80 0xE10B1D8 0x30 /* mii */
81 0xE10B308 0x30 /* pmac */
83 interrupt-parent = <&icu0>;
87 compatible = "lantiq,xrx200-pdi";
91 mac-address = [ 00 11 22 33 44 55 ];
94 compatible = "lantiq,xrx200-pdi-port";
100 compatible = "lantiq,xrx200-pdi-port";
103 phy-handle = <&phy1>;
106 compatible = "lantiq,xrx200-pdi-port";
109 phy-handle = <&phy11>;
112 compatible = "lantiq,xrx200-pdi-port";
115 phy-handle = <&phy13>;
120 compatible = "lantiq,xrx200-pdi";
121 #address-cells = <1>;
124 mac-address = [ 00 11 22 33 44 56 ];
127 compatible = "lantiq,xrx200-pdi-port";
130 phy-handle = <&phy5>;
135 #address-cells = <1>;
137 compatible = "lantiq,xrx200-mdio";
138 phy0: ethernet-phy@0 {
140 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
141 lantiq,c45-reg-init = <1 0 0 0>;
143 phy1: ethernet-phy@1 {
145 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
146 lantiq,c45-reg-init = <1 0 0 0>;
148 phy5: ethernet-phy@5 {
150 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
151 lantiq,c45-reg-init = <1 0 0 0>;
153 phy11: ethernet-phy@11 {
155 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
156 lantiq,c45-reg-init = <1 0 0 0>;
158 phy13: ethernet-phy@13 {
160 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
161 lantiq,c45-reg-init = <1 0 0 0>;
167 compatible = "lantiq,gpio-stp-xway";
168 reg = <0xE100BB0 0x40>;
172 lantiq,shadow = <0xffff>;
173 lantiq,groups = <0x3>;
182 gpios = <&gpio 32 0>;
183 lantiq,portmask = <0x3>;
187 #address-cells = <3>;
189 #interrupt-cells = <1>;
190 compatible = "lantiq,pci-xway1";
191 bus-range = <0x0 0x0>;
192 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
193 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
194 reg = <0x7000000 0x8000 /* config space */
195 0xE105400 0x400>; /* pci bridge */
196 lantiq,bus-clock = <33333333>;
197 /*lantiq,external-clock;*/
198 lantiq,delay-hi = <0>; /* 0ns delay */
199 lantiq,delay-lo = <0>; /* 0.0ns delay */
200 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
202 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
204 gpios-reset = <&gpio 21 0>;
205 req-mask = <0x1>; /* GNT1 */
210 compatible = "lantiq,phy-xrx200";
211 firmware = "lantiq/vr9_phy11g_a1x.bin";
216 compatible = "gpio-keys-polled";
217 #address-cells = <1>;
219 poll-interval = <100>;
223 linux,code = <0x198>;
227 gpios = <&gpio 41 1>;
232 gpios = <&gpio 45 1>;
237 gpios = <&gpio 10 1>;
238 linux,code = <0x211>;
243 compatible = "gpio-leds";
253 wps_yellow { /* yellow */
254 label = "wps_yellow";
265 internet_yellow { /* yellow */
266 label = "internet_yellow";
269 internet_red { /* red */
270 label = "internet_red";
273 broadband_red { /* red */
274 label = "broadband_red";
277 broadband_yellow { /* yellow */
278 label = "broadband_yellow";
285 wireless_red { /* red */
286 label = "wireless_red";
289 wireless_yellow { /* yellow */
290 label = "wireless_yellow";
293 power2 { /* yellow */
300 default-state = "on";