target/linux/lantiq/files/arch/mips/boot/dts/ARV752DPW.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube";
   9         model = "Arcor 802";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power_red;
  17                 led-failsafe = &power_blue;
  18                 led-running = &power_red;
  19                 led-upgrade = &power_red;
  20
  21                 led-dsl = &internet_red;
  22                 led-usb = &umts;
  23                 led-wifi = &wifi;
  24         };
  25
  26         memory@0 {
  27                 device_type = "memory";
  28                 reg = <0x0 0x4000000>;
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <100>;
  34
  35                 wps {
  36                         label = "wps";
  37                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_WPS_BUTTON>;
  39                 };
  40                 restart {
  41                         label = "restart";
  42                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_POWER>;
  44                 };
  45                 dsl {
  46                         label = "dsl";
  47                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  48                         linux,code = <BTN_0>;
  49                 };
  50                 reset {
  51                         label = "reset";
  52                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  53                         linux,code = <KEY_RESTART>;
  54                 };
  55         };
  56
  57         leds {
  58                 compatible = "gpio-leds";
  59                 power_blue: power1 {
  60                         label = "arv752dpw:blue:power";
  61                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  62                 };
  63                 internet_red: internet {
  64                         label = "arv752dpw:red:internet";
  65                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  66                 };
  67                 message {
  68                         label = "arv752dpw:red:message";
  69                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  70                 };
  71                 power_red: power {
  72                         label = "arv752dpw:red:power";
  73                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  74                         default-state = "keep";
  75                 };
  76                 voice1 {
  77                         label = "arv752dpw:red:voice";
  78                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  79                 };
  80                 umts: umts {
  81                         label = "arv752dpw:red:umts";
  82                         gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
  83                 };
  84                 wifi: wifi {
  85                         label = "arv752dpw:red:wifi";
  86                         gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
  87                 };
  88                 fxs1 {
  89                         label = "arv752dpw:green:tae-n";
  90                         gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
  91                 };
  92                 fxs2 {
  93                         label = "arv752dpw:green:tae-u";
  94                         gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
  95                 };
  96                 fxo {
  97                         label = "arv752dpw:green:isdn";
  98                         gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
  99                 };
 100                 internet2 {
 101                         label = "arv752dpw:blue:internet";
 102                         gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
 103                 };
 104                 voice2 {
 105                         label = "arv752dpw:blue:voice";
 106                         gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
 107                 };
 108         };
 109 };
 110
 111 &gpio {
 112         pinctrl-names = "default";
 113         pinctrl-0 = <&state_default>;
 114
 115         state_default: pinmux {
 116                 ebu {
 117                         lantiq,groups = "ebu cs1";
 118                         lantiq,function = "ebu";
 119                 };
 120                 exin {
 121                         lantiq,groups = "exin1";
 122                         lantiq,function = "exin";
 123                         lantiq,pull = <2>;
 124                         lantiq,output = <0>;
 125                 };
 126                 pci_in {
 127                         lantiq,groups = "req2", "req1";
 128                         lantiq,function = "pci";
 129                         lantiq,open-drain = <1>;
 130                         lantiq,pull = <2>;
 131                         lantiq,output = <0>;
 132                 };
 133                 pci_out {
 134                         lantiq,groups = "gnt1";
 135                         lantiq,function = "pci";
 136                         lantiq,output = <1>;
 137                 };
 138                 pci_rst {
 139                         lantiq,pins = "io21";
 140                         lantiq,pull = <2>;
 141                         lantiq,output = <1>;
 142                 };
 143                 leds {
 144                         lantiq,pins = "io3", "io5", "io6", "io8";
 145                         lantiq,output = <1>;
 146                         lantiq,pull = <0>;
 147                 };
 148                 keys {
 149                         lantiq,pins = "io11", "io12", "io13", "io28";
 150                         lantiq,output = <0>;
 151                         lantiq,pull = <2>;
 152                         lantiq,open-drain = <1>;
 153                 };
 154         };
 155
 156         usb_vbus: regulator-usb-vbus {
 157                 compatible = "regulator-fixed";
 158
 159                 regulator-name = "USB_VBUS";
 160
 161                 regulator-min-microvolt = <5000000>;
 162                 regulator-max-microvolt = <5000000>;
 163
 164                 gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
 165                 enable-active-high;
 166         };
 167 };
 168
 169 &gsw {
 170         phy-mode = "rmii";
 171         mtd-mac-address = <&boardconfig 0x16>;
 172 };
 173
 174 &localbus {
 175         flash@0 {
 176                 compatible = "lantiq,nor";
 177                 bank-width = <2>;
 178                 reg = <0 0x0 0x800000>;
 179
 180                 partitions {
 181                         compatible = "fixed-partitions";
 182                         #address-cells = <1>;
 183                         #size-cells = <1>;
 184
 185                         partition@0 {
 186                                 label = "uboot";
 187                                 reg = <0x00000 0x10000>;
 188                                 read-only;
 189                         };
 190
 191                         partition@10000 {
 192                                 label = "uboot_env";
 193                                 reg = <0x10000 0x10000>;
 194                                 read-only;
 195                         };
 196
 197                         partition@20000 {
 198                                 label = "firmware";
 199                                 reg = <0x20000 0x7d0000>;
 200                         };
 201
 202                         boardconfig: partition@7f0000 {
 203                                 label = "board_config";
 204                                 reg = <0x7f0000 0x10000>;
 205                                 read-only;
 206                         };
 207                 };
 208         };
 209
 210         gpiomm: gpio@1 {
 211                 compatible = "lantiq,gpio-mm";
 212                 reg = <1 0x0 0x10 >;
 213                 #address-cells = <1>;
 214                 #size-cells = <1>;
 215                 #gpio-cells = <2>;
 216                 gpio-controller;
 217                 lantiq,shadow = <0x3>;
 218         };
 219 };
 220
 221 &pci0 {
 222         status = "okay";
 223         lantiq,external-clock;
 224         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 225         interrupt-map = <0x7000 0 0 1 &icu0 135>;
 226         req-mask = <0x3>;
 227
 228         wifi@1814,0601 {
 229                 compatible = "pci1814,0601";
 230                 reg = <0x7000 0 0 0 0>;
 231                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 232                 ralink,mtd-eeprom-swap;
 233         };
 234 };
 235
 236 &usb_phy {
 237         status = "okay";
 238 };
 239
 240 &usb {
 241         status = "okay";
 242         vbus-supply = <&usb_vbus>;
 243 };
 244
 245 &vmmc {
 246         status = "okay";
 247         gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
 248 };