3 #include "P2812HNUFX.dtsi"
6 compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
7 model = "ZyXEL P-2812HNU-F1";
16 label = "p2812hnuf1:green:usb1";
17 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
20 label = "p2812hnuf1:green:usb2";
21 gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
28 compatible = "lantiq,nand-xway";
31 reg = <0 0x0 0x2000000>;
33 pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
34 pinctrl-names = "default";
37 compatible = "fixed-partitions";
43 reg = <0x00000 0x40000>;
47 reg = <0x40000 0x20000>;
51 reg = <0x60000 0x300000>;
55 reg = <0x360000 0x7ca0000>;
63 compatible = "pci1814,3062";
64 reg = <0x7000 0 0 0 0>;
65 ralink,eeprom = "RT3062.eeprom";