5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
9 compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
10 model = "BT OpenReach VDSL Modem";
13 bootargs = "console=ttyLTQ0,115200";
17 led-boot = &power_green;
18 led-failsafe = &power_red;
19 led-running = &power_green;
20 led-upgrade = &power_green;
26 device_type = "memory";
27 reg = <0x0 0x2000000>;
31 compatible = "gpio-keys-polled";
34 poll-interval = <100>;
37 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_RESTART>;
43 compatible = "gpio-leds";
46 label = "vg3503j:red:power";
47 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
50 label = "vg3503j:green:dsl";
51 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
54 label = "vg3503j:green:power";
55 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
56 default-state = "keep";
63 compatible = "lantiq,xrx200-pdi";
70 compatible = "lantiq,xrx200-pdi-port";
73 phy-handle = <&phy11>;
76 compatible = "lantiq,xrx200-pdi-port";
79 phy-handle = <&phy13>;
86 compatible = "lantiq,xrx200-mdio";
88 phy11: ethernet-phy@11 {
90 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
91 lantiq,led1h = <0x70>;
92 lantiq,led1l = <0x00>;
93 lantiq,led2h = <0x00>;
94 lantiq,led2l = <0x03>;
96 phy13: ethernet-phy@13 {
98 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
99 lantiq,led1h = <0x70>;
100 lantiq,led1l = <0x00>;
101 lantiq,led2h = <0x00>;
102 lantiq,led2l = <0x03>;
108 lantiq,gphy-mode = <GPHY_MODE_GE>;
112 lantiq,gphy-mode = <GPHY_MODE_GE>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&state_default>;
119 state_default: pinmux {
121 lantiq,groups = "mdio";
122 lantiq,function = "mdio";
125 lantiq,groups = "gphy0 led0", "gphy0 led1",
126 "gphy0 led2", "gphy1 led0",
127 "gphy1 led1", "gphy1 led2";
128 lantiq,function = "gphy";
130 lantiq,open-drain = <0>;
138 compatible = "lantiq,nor";
140 reg = <0 0x0 0x2000000>;
141 #address-cells = <1>;
145 compatible = "fixed-partitions";
146 #address-cells = <1>;
151 reg = <0x00000 0x20000>;
156 reg = <0x20000 0x7d0000>;
161 reg = <0x7f0000 0x10000>;