1 #include <dt-bindings/gpio/gpio.h>
6 compatible = "lantiq,xway", "lantiq,danube";
13 stdout-path = "serial0:115200n8";
21 compatible = "mips,mips24Kc";
29 compatible = "lantiq,biu", "simple-bus";
30 reg = <0x1f800000 0x800000>;
31 ranges = <0x0 0x1f800000 0x7fffff>;
34 #interrupt-cells = <1>;
36 compatible = "lantiq,icu";
45 compatible = "lantiq,wdt";
53 compatible = "lantiq,sram", "simple-bus";
54 reg = <0x1f000000 0x800000>;
55 ranges = <0x0 0x1f000000 0x7fffff>;
58 #interrupt-cells = <1>;
60 compatible = "lantiq,eiu-xway";
61 reg = <0x101000 0x1000>;
62 interrupt-parent = <&icu0>;
63 lantiq,eiu-irqs = <166 135 66>;
67 compatible = "lantiq,pmu-xway";
68 reg = <0x102000 0x1000>;
72 compatible = "lantiq,cgu-xway";
73 reg = <0x103000 0x1000>;
79 compatible = "lantiq,vmmc-xway";
80 reg = <0x103000 0x400>;
81 interrupt-parent = <&icu0>;
82 interrupts = <150 151 152 153 154 155>;
86 compatible = "lantiq,danube-rcu", "simple-mfd", "syscon";
87 reg = <0x203000 0x1000>;
88 ranges = <0x0 0x203000 0x100>;
91 reset: reset-controller@10 {
92 compatible = "lantiq,danube-reset";
93 reg = <0x10 4>, <0x14 4>;
98 usb_phy: usb2-phy@18 {
99 compatible = "lantiq,danube-usb2-phy";
103 resets = <&reset 4 4>;
104 reset-names = "ctrl";
109 compatible = "syscon-reboot";
120 #address-cells = <1>;
122 compatible = "lantiq,fpi", "simple-bus";
123 ranges = <0x0 0x10000000 0xeefffff>;
124 reg = <0x10000000 0xef00000>;
126 localbus: localbus@0 {
127 #address-cells = <2>;
129 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
130 1 0 0x4000000 0x4000010>; /* addsel1 */
131 compatible = "lantiq,localbus", "simple-bus";
134 compatible = "lantiq,gpio-mm";
136 #address-cells = <1>;
145 compatible = "lantiq,gptu-xway";
146 reg = <0xe100a00 0x100>;
147 interrupt-parent = <&icu0>;
148 interrupts = <126 127 128 129 130 131>;
153 compatible = "lantiq,gpio-stp-xway";
155 reg = <0xe100bb0 0x40>;
156 lantiq,shadow = <0xfff>;
157 lantiq,groups = <0x3>;
161 asc0: serial@e100400 {
162 compatible = "lantiq,asc";
163 reg = <0xe100400 0x400>;
164 interrupt-parent = <&icu0>;
165 interrupts = <104 105 106>;
169 gpio: pinmux@e100b10 {
170 compatible = "lantiq,danube-pinctrl";
173 reg = <0xe100b10 0xa0>;
176 asc1: serial@e100c00 {
177 compatible = "lantiq,asc";
178 reg = <0xe100c00 0x400>;
179 interrupt-parent = <&icu0>;
180 interrupts = <112 113 114>;
184 compatible = "lantiq,danube-usb";
185 reg = <0xe101000 0x1000
187 interrupt-parent = <&icu0>;
191 phy-names = "usb2-phy";
196 compatible = "lantiq,deu-danube";
197 reg = <0xe103100 0xf00>;
201 compatible = "lantiq,dma-xway";
202 reg = <0xe104100 0x800>;
206 compatible = "lantiq,ebu-xway";
207 reg = <0xe105300 0x100>;
211 compatible = "lantiq,mei-xway";
212 reg = <0xe116000 0x400>;
213 interrupt-parent = <&icu0>;
218 compatible = "lantiq,etop-xway";
219 reg = <0xe180000 0x40000>;
220 interrupt-parent = <&icu0>;
221 interrupts = <73 78>;
222 mac-address = [ 00 11 22 33 44 55 ];
226 compatible = "lantiq,ppe-danube";
227 reg = <0xe234000 0x40000>;
228 interrupt-parent = <&icu0>;
235 #address-cells = <3>;
237 #interrupt-cells = <1>;
238 compatible = "lantiq,pci-xway";
239 bus-range = <0x0 0x0>;
240 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
241 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
242 reg = <0x7000000 0x8000 /* config space */
243 0xe105400 0x400>; /* pci bridge */
244 lantiq,bus-clock = <33333333>;
245 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
246 interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
247 req-mask = <0x1>; /* GNT1 */
252 compatible = "lantiq,adsl-danube";