3 #include <dt-bindings/gpio/gpio.h>
8 compatible = "lantiq,xway", "lantiq,ase";
15 stdout-path = "serial0:115200n8";
23 compatible = "mips,mips4Kc";
29 compatible = "syscon-reboot";
39 compatible = "lantiq,biu", "simple-bus";
40 reg = <0x1f800000 0x800000>;
41 ranges = <0x0 0x1f800000 0x7fffff>;
44 #interrupt-cells = <1>;
46 compatible = "lantiq,icu";
51 compatible = "lantiq,wdt";
59 compatible = "lantiq,sram", "simple-bus";
60 reg = <0x1f000000 0x800000>;
61 ranges = <0x0 0x1f000000 0x7fffff>;
64 #interrupt-cells = <1>;
66 compatible = "lantiq,eiu-xway";
67 reg = <0x101000 0x1000>;
68 interrupt-parent = <&icu0>;
69 lantiq,eiu-irqs = <29 30 31>;
73 compatible = "lantiq,pmu-xway";
74 reg = <0x102000 0x1000>;
78 compatible = "lantiq,cgu-xway";
79 reg = <0x103000 0x1000>;
86 compatible = "lantiq,ase-rcu", "simple-mfd", "syscon";
87 reg = <0x203000 0x1000>;
88 ranges = <0x0 0x203000 0x100>;
91 reset: reset-controller@10 {
92 compatible = "lantiq,danube-reset";
93 reg = <0x10 4>, <0x14 4>;
98 usb_phy: usb2-phy@18 {
99 compatible = "lantiq,ase-usb2-phy";
103 resets = <&reset 4 4>;
104 reset-names = "ctrl";
111 #address-cells = <1>;
113 compatible = "lantiq,fpi", "simple-bus";
114 ranges = <0x0 0x10000000 0xeefffff>;
115 reg = <0x10000000 0xef00000>;
117 localbus: localbus@0 {
118 #address-cells = <2>;
120 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
121 1 0 0x4000000 0x4000010>; /* addsel1 */
122 compatible = "lantiq,localbus", "simple-bus";
126 compatible = "lantiq,ase-spi";
127 reg = <0xe100800 0x100>;
128 interrupt-parent = <&icu0>;
129 interrupts = <24 25 26>;
130 interrupt-names = "spi_rx", "spi_tx", "spi_err",
132 #address-cells = <1>;
134 pinctrl-names = "default";
135 pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>;
140 compatible = "lantiq,gptu-xway";
141 reg = <0xe100a00 0x100>;
142 interrupt-parent = <&icu0>;
143 interrupts = <33 34 35 36 37 38>;
146 gpio: pinmux@e100b10 {
147 compatible = "lantiq,ase-pinctrl";
150 reg = <0xe100b10 0xa0>;
154 lantiq,groups = "asc";
155 lantiq,function = "asc";
161 lantiq,groups = "mdio";
162 lantiq,function = "mdio";
168 lantiq,groups = "spi_di";
169 lantiq,function = "spi";
172 lantiq,groups = "spi_do", "spi_clk";
173 lantiq,function = "spi";
178 spi_cs4_pins: spi-cs4 {
180 lantiq,groups = "spi_cs4";
181 lantiq,function = "spi";
187 asc1: serial@e100c00 {
188 compatible = "lantiq,asc";
189 reg = <0xe100c00 0x400>;
190 interrupt-parent = <&icu0>;
191 interrupts = <72 74 75>;
192 pinctrl-0 = <&asc_pins>;
193 pinctrl-names = "default";
197 compatible = "lantiq,mei-xway";
198 reg = <0xe116000 0x400>;
199 interrupt-parent = <&icu0>;
204 compatible = "lantiq,ase-usb";
205 reg = <0xe101000 0x1000
207 interrupt-parent = <&icu0>;
211 phy-names = "usb2-phy";
216 compatible = "lantiq,dma-xway";
217 reg = <0xe104100 0x800>;
221 compatible = "lantiq,ebu-xway";
222 reg = <0xe105300 0x100>;
226 compatible = "lantiq,ppe-ase";
227 reg = <0xe234000 0x40000>;
228 interrupt-parent = <&icu0>;
233 compatible = "lantiq,etop-xway";
234 reg = <0xe180000 0x40000>;
235 interrupt-parent = <&icu0>;
236 interrupts = <105 109>;
237 pinctrl-0 = <&mdio_pins>;
238 pinctrl-names = "default";
239 lantiq,tx-burst-length = <4>;
240 lantiq,rx-burst-length = <4>;
245 compatible = "lantiq,adsl-ase";