5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv4520pw", "lantiq,xway", "lantiq,danube";
9 model = "Easybox 800, WAV-281";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_blue;
17 led-failsafe = &power_red;
18 led-running = &power_blue;
19 led-upgrade = &power_blue;
22 led-internet = &internet_blue;
28 device_type = "memory";
29 reg = <0x0 0x2000000>;
33 compatible = "gpio-keys-polled";
34 poll-interval = <100>;
38 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_WPS_BUTTON>;
43 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RESTART>;
49 compatible = "gpio-leds";
52 label = "arv4520pw:blue:power";
53 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
54 default-state = "keep";
57 label = "arv4520pw:blue:dsl";
58 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
60 internet_blue: internet {
61 label = "arv4520pw:blue:internet";
62 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
65 label = "arv4520pw:red:power";
66 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
69 label = "arv4520pw:yellow:wps";
70 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
73 label = "arv4520pw:red:wps";
74 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
80 label = "arv4520pw:blue:telefon1";
81 gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
84 label = "arv4520pw:blue:telefon2";
85 gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
88 label = "arv4520pw:blue:isdn";
89 gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
92 label = "arv4520pw:blue:line";
93 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
96 label = "arv4520pw:blue:sprache";
97 gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
100 label = "arv4520pw:blue:usb";
101 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
104 label = "arv4520pw:blue:wifi";
105 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
108 label = "arv4520pw:red:internet";
109 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
116 usb_vbus: regulator-usb-vbus {
117 compatible = "regulator-fixed";
119 regulator-name = "USB_VBUS";
121 regulator-min-microvolt = <5000000>;
122 regulator-max-microvolt = <5000000>;
124 gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
130 pinctrl-names = "default";
131 pinctrl-0 = <&state_default>;
133 state_default: pinmux {
135 lantiq,groups = "ebu cs1";
136 lantiq,function = "ebu";
139 lantiq,pins = "io21";
140 lantiq,open-drain = <0>;
147 /* gpiomm 10 - switch */
149 mtd-mac-address = <&boardconfig 0x16>;
154 compatible = "lantiq,nor";
156 reg = <0 0x0 0x800000>;
159 compatible = "fixed-partitions";
160 #address-cells = <1>;
165 reg = <0x00000 0x20000>;
171 reg = <0x20000 0x10000>;
177 reg = <0x30000 0x3c0000>;
180 boardconfig: partition@7f0000 {
181 label = "boardconfig";
182 reg = <0x3f0000 0x10000>;
189 compatible = "lantiq,gpio-mm";
191 #address-cells = <1>;
195 lantiq,shadow = <0x400>;
202 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
203 pinctrl-names = "default";
205 lantiq,external-clock;
206 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
215 vbus-supply = <&usb_vbus>;
220 gpios = <&gpio 31 GPIO_ACTIVE_HIGH
221 &gpiomm 7 GPIO_ACTIVE_HIGH>;