3 #include <dt-bindings/input/input.h>
6 compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
7 model = "Alice/O2 IAD 4421";
10 bootargs = "console=ttyLTQ0,115200";
15 led-failsafe = &power_red;
20 led-internet = &internet;
25 device_type = "memory";
26 reg = <0x0 0x4000000>;
30 compatible = "gpio-keys-polled";
31 poll-interval = <100>;
35 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
36 linux,code = <KEY_RFKILL>;
40 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
41 linux,code = <KEY_RESTART>;
46 compatible = "gpio-leds";
49 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
52 label = "green:power";
53 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
54 default-state = "keep";
58 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
61 label = "green:internet";
62 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
64 power_red: power_red {
66 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
69 label = "red:internet";
70 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
74 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
77 label = "green:telefon";
78 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
82 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
88 pinctrl-names = "default";
89 pinctrl-0 = <&state_default>;
91 state_default: pinmux {
100 /* GPIO 19: switch reset */
103 mtd-mac-address = <&boardconfig 0x16>;
108 compatible = "lantiq,nor";
110 reg = <0 0x0 0x800000>;
113 compatible = "fixed-partitions";
114 #address-cells = <1>;
119 reg = <0x00000 0x40000>;
124 label = "u-boot-env";
125 reg = <0x40000 0x10000>;
131 reg = <0x50000 0x7a0000>;
134 boardconfig: partition@7f0000 {
135 label = "board_config";
136 reg = <0x7f0000 0x10000>;
146 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
147 pinctrl-names = "default";
149 lantiq,external-clock;
150 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
153 compatible = "pci1814,3592";
154 reg = <0x7000 0 0 0 0>;
155 ralink,mtd-eeprom = <&boardconfig 0x410>;
156 ralink,mtd-eeprom-swap;
157 mtd-mac-address = <&boardconfig 0x16>;
158 mtd-mac-address-increment = <1>;